[PATCH v2 1/4] gpio: aspeed: Rework register type accessors
Benjamin Herrenschmidt
benh at kernel.crashing.org
Mon Jun 18 14:53:49 AEST 2018
Use a single accessor function for all register types instead
of several spread around. This will make it easier/cleaner
to introduce new registers and keep the mechanism in one
place.
The big switch/case is optimized at compile time since the
switch value is a constant.
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
drivers/gpio/gpio-aspeed.c | 118 ++++++++++++++++++++++---------------
1 file changed, 69 insertions(+), 49 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index b31ae16170e7..c9baeeb7f0cc 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -127,12 +127,21 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
},
};
-#define GPIO_BANK(x) ((x) >> 5)
-#define GPIO_OFFSET(x) ((x) & 0x1f)
-#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
+enum aspeed_gpio_reg {
+ reg_val,
+ reg_dir,
+ reg_irq_enable,
+ reg_irq_type0,
+ reg_irq_type1,
+ reg_irq_type2,
+ reg_irq_status,
+ reg_debounce_sel1,
+ reg_debounce_sel2,
+ reg_tolerance,
+};
-#define GPIO_DATA 0x00
-#define GPIO_DIR 0x04
+#define GPIO_VAL_VALUE 0x00
+#define GPIO_VAL_DIR 0x04
#define GPIO_IRQ_ENABLE 0x00
#define GPIO_IRQ_TYPE0 0x04
@@ -143,6 +152,40 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
#define GPIO_DEBOUNCE_SEL1 0x00
#define GPIO_DEBOUNCE_SEL2 0x04
+/* This will be resolved at compile time */
+static inline void __iomem *bank_reg(struct aspeed_gpio *gpio,
+ const struct aspeed_gpio_bank *bank,
+ const enum aspeed_gpio_reg reg)
+{
+ switch (reg) {
+ case reg_val:
+ return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
+ case reg_dir:
+ return gpio->base + bank->val_regs + GPIO_VAL_DIR;
+ case reg_irq_enable:
+ return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
+ case reg_irq_type0:
+ return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
+ case reg_irq_type1:
+ return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
+ case reg_irq_type2:
+ return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
+ case reg_irq_status:
+ return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
+ case reg_debounce_sel1:
+ return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL1;
+ case reg_debounce_sel2:
+ return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL2;
+ case reg_tolerance:
+ return gpio->base + bank->tolerance_regs;
+ }
+ BUG_ON(1);
+}
+
+#define GPIO_BANK(x) ((x) >> 5)
+#define GPIO_OFFSET(x) ((x) & 0x1f)
+#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
+
#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)
@@ -201,27 +244,12 @@ static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
return !props || (props->output & GPIO_BIT(offset));
}
-static void __iomem *bank_val_reg(struct aspeed_gpio *gpio,
- const struct aspeed_gpio_bank *bank,
- unsigned int reg)
-{
- return gpio->base + bank->val_regs + reg;
-}
-
-static void __iomem *bank_irq_reg(struct aspeed_gpio *gpio,
- const struct aspeed_gpio_bank *bank,
- unsigned int reg)
-{
- return gpio->base + bank->irq_regs + reg;
-}
-
static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
const struct aspeed_gpio_bank *bank = to_bank(offset);
- return !!(ioread32(bank_val_reg(gpio, bank, GPIO_DATA))
- & GPIO_BIT(offset));
+ return !!(ioread32(bank_reg(gpio, bank, reg_val)) & GPIO_BIT(offset));
}
static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
@@ -232,7 +260,7 @@ static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
void __iomem *addr;
u32 reg;
- addr = bank_val_reg(gpio, bank, GPIO_DATA);
+ addr = bank_reg(gpio, bank, reg_val);
reg = gpio->dcache[GPIO_BANK(offset)];
if (val)
@@ -269,8 +297,8 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
spin_lock_irqsave(&gpio->lock, flags);
- reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
- iowrite32(reg & ~GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
+ reg = ioread32(bank_reg(gpio, bank, reg_dir));
+ iowrite32(reg & ~GPIO_BIT(offset), bank_reg(gpio, bank, reg_dir));
spin_unlock_irqrestore(&gpio->lock, flags);
@@ -291,8 +319,8 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
spin_lock_irqsave(&gpio->lock, flags);
__aspeed_gpio_set(gc, offset, val);
- reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
- iowrite32(reg | GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
+ reg = ioread32(bank_reg(gpio, bank, reg_dir));
+ iowrite32(reg | GPIO_BIT(offset), bank_reg(gpio, bank, reg_dir));
spin_unlock_irqrestore(&gpio->lock, flags);
@@ -314,7 +342,7 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
spin_lock_irqsave(&gpio->lock, flags);
- val = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)) & GPIO_BIT(offset);
+ val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset);
spin_unlock_irqrestore(&gpio->lock, flags);
@@ -358,7 +386,7 @@ static void aspeed_gpio_irq_ack(struct irq_data *d)
if (rc)
return;
- status_addr = bank_irq_reg(gpio, bank, GPIO_IRQ_STATUS);
+ status_addr = bank_reg(gpio, bank, reg_irq_status);
spin_lock_irqsave(&gpio->lock, flags);
iowrite32(bit, status_addr);
@@ -378,7 +406,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
if (rc)
return;
- addr = bank_irq_reg(gpio, bank, GPIO_IRQ_ENABLE);
+ addr = bank_reg(gpio, bank, reg_irq_enable);
spin_lock_irqsave(&gpio->lock, flags);
@@ -442,17 +470,17 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
spin_lock_irqsave(&gpio->lock, flags);
- addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE0);
+ addr = bank_reg(gpio, bank, reg_irq_type0);
reg = ioread32(addr);
reg = (reg & ~bit) | type0;
iowrite32(reg, addr);
- addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE1);
+ addr = bank_reg(gpio, bank, reg_irq_type1);
reg = ioread32(addr);
reg = (reg & ~bit) | type1;
iowrite32(reg, addr);
- addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE2);
+ addr = bank_reg(gpio, bank, reg_irq_type2);
reg = ioread32(addr);
reg = (reg & ~bit) | type2;
iowrite32(reg, addr);
@@ -477,7 +505,7 @@ static void aspeed_gpio_irq_handler(struct irq_desc *desc)
for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) {
const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
- reg = ioread32(bank_irq_reg(data, bank, GPIO_IRQ_STATUS));
+ reg = ioread32(bank_reg(data, bank, reg_irq_status));
for_each_set_bit(p, ®, 32) {
girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
@@ -549,21 +577,21 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
unsigned int offset, bool enable)
{
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
- const struct aspeed_gpio_bank *bank;
unsigned long flags;
+ void __iomem *treg;
u32 val;
- bank = to_bank(offset);
+ treg = bank_reg(gpio, to_bank(offset), reg_tolerance);
spin_lock_irqsave(&gpio->lock, flags);
- val = readl(gpio->base + bank->tolerance_regs);
+ val = readl(treg);
if (enable)
val |= GPIO_BIT(offset);
else
val &= ~GPIO_BIT(offset);
- writel(val, gpio->base + bank->tolerance_regs);
+ writel(val, treg);
spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
@@ -582,13 +610,6 @@ static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
pinctrl_gpio_free(chip->base + offset);
}
-static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,
- const struct aspeed_gpio_bank *bank,
- unsigned int reg)
-{
- return gpio->base + bank->debounce_regs + reg;
-}
-
static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
u32 *cycles)
{
@@ -666,11 +687,11 @@ static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
void __iomem *addr;
u32 val;
- addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1);
+ addr = bank_reg(gpio, bank, reg_debounce_sel1);
val = ioread32(addr);
iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);
- addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2);
+ addr = bank_reg(gpio, bank, reg_debounce_sel2);
val = ioread32(addr);
iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
}
@@ -904,9 +925,8 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
/* Populate it with initial values read from the HW */
for (i = 0; i < banks; i++) {
- const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
- gpio->dcache[i] = ioread32(gpio->base + bank->val_regs +
- GPIO_DATA);
+ void __iomem *addr = bank_reg(gpio, &aspeed_gpio_banks[i], reg_val);
+ gpio->dcache[i] = ioread32(addr);
}
rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
--
2.17.1
More information about the Linux-aspeed
mailing list