[PATCH] ARM: dts: aspeed: Add LPC reset controller node

[Joel Stanley]

On both the ast2400 and ast2500 SoCs, the LPC reset controller is
required to bring the UARTs out of reset without waiting for the LPC
reset to be deasserted.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
Bindings and driver change is under reivew:
  https://lkml.org/lkml/2018/2/19/12

 arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 48c28a71ae7e..36ae23aa3b48 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -162,6 +162,7 @@
 				reg-shift = <2>;
 				interrupts = <9>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -249,6 +250,12 @@
 						reg = <0x20 0x24 0x48 0x8>;
 					};
 
+					lpc_reset: reset-controller at 18 {
+						compatible = "aspeed,ast2400-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
 					ibt: ibt at c0  {
 						compatible = "aspeed,ast2400-ibt-bmc";
 						reg = <0xc0 0x18>;
@@ -264,6 +271,7 @@
 				reg-shift = <2>;
 				interrupts = <32>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -274,6 +282,7 @@
 				reg-shift = <2>;
 				interrupts = <33>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -284,6 +293,7 @@
 				reg-shift = <2>;
 				interrupts = <34>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
 				no-loopback-test;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 8eac57c33880..17ee0fa33a14 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -205,6 +205,7 @@
 				reg-shift = <2>;
 				interrupts = <9>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -299,6 +300,12 @@
 						reg = <0x20 0x24 0x48 0x8>;
 					};
 
+					lpc_reset: reset-controller at 18 {
+						compatible = "aspeed,ast2500-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
 					ibt: ibt at c0 {
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
@@ -314,6 +321,7 @@
 				reg-shift = <2>;
 				interrupts = <32>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -324,6 +332,7 @@
 				reg-shift = <2>;
 				interrupts = <33>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -334,6 +343,7 @@
 				reg-shift = <2>;
 				interrupts = <34>;
 				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
 				no-loopback-test;
 				status = "disabled";
 			};
-- 
2.15.1