[PATCH 2/2] ARM: dts: aspeed: Add KCS support for LPC BMC
Jae Hyun Yoo
jae.hyun.yoo at linux.intel.com
Wed Dec 12 05:39:40 AEDT 2018
Hi Vijay,
On 12/10/2018 12:07 PM, Vijay Khemka wrote:
> Added kcs device support for lpc BMC.
>
> Signed-off-by: Vijay Khemka <vijaykhemka at fb.com>
> ---
> arch/arm/boot/dts/aspeed-g5.dtsi | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index d107459fc0f8..1bd48655bacb 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -330,8 +330,35 @@
> ranges = <0x0 0x1e789000 0x1000>;
>
> lpc_bmc: lpc-bmc at 0 {
> - compatible = "aspeed,ast2500-lpc-bmc";
> + compatible = "aspeed,ast2500-lpc-bmc, "simple-mfd", "syscon"";
> reg = <0x0 0x80>;
> + reg-io-width = <4>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x80>;
> +
> + kcs1: kcs1 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
This reg property isn't needed at here because kcs_bmc_aspeed module
reads regmap from the parent node. Please check below code in the
driver code.
priv->map = syscon_node_to_regmap(dev->parent->of_node);
> + interrupts = <8>;
> + kcs_chan = <1>;
> + status = "disabled";
> + };
> + kcs2: kcs2 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
ditto.
> + interrupts = <8>;
> + kcs_chan = <2>;
> + status = "disabled";
> + };
> + kcs3: kcs3 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
ditto.
> + interrupts = <8>;
> + kcs_chan = <3>;
> + status = "disabled";
> + };
> };
>
> lpc_host: lpc-host at 80 {
>
You might need to add kcs4 as a sub-node under lpc_host like below:
kcs4: kcs4 at 0 {
compatible = "aspeed,ast2500-kcs-bmc";
interrupts = <8>;
kcs_chan = <4>;
status = "disabled";
};
This would be uses as an SMM channel.
-Jae
More information about the Linux-aspeed
mailing list