[PATCH 17/20] ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
Joel Stanley
joel at jms.id.au
Mon Dec 11 16:07:01 AEDT 2017
From: Xo Wang <xow at google.com>
Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds
basic DTS support for its AST2500 BMC.
This adds the device tree description for most upstream components. It
is a squashed commit of all of the patches from the OpenBMC kernel tree.
Signed-off-by: Xo Wang <xow at google.com>
Signed-off-by: Patrick Venture <venture at google.com>
Signed-off-by: Robert Lippert <rlippert at google.com>
Signed-off-by: Peter Hanson <peterh at google.com>
Signed-off-by: Jeremy Kerr <jk at ozlabs.org>
Signed-off-by: Cédric Le Goater <clg at kaod.org>
Signed-off-by: Rick Altherr <raltherr at google.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 427 +++++++++++++++++++++++++++++
2 files changed, 429 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 15a9207319c1..48c55f307aa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1105,6 +1105,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
- aspeed-bmc-opp-witherspoon.dtb
-
+ aspeed-bmc-opp-witherspoon.dtb \
+ aspeed-bmc-opp-zaius.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..90d77012495d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Zaius BMC";
+ compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region at 98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ onewire0 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire1 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire2 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire3 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 7)>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_boot_status {
+ label = "System boot status";
+ gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ attention {
+ label = "Attention";
+ gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ plt_fault {
+ label = "Platform fault";
+ gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ hdd_fault {
+ label = "Onboard drive fault";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash at 0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2cs0_default
+ &pinctrl_spi2cs1_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default>;
+
+ flash at 0 {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc at 68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ ucd90160 at 64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+
+ /* Power sequencer UCD90160 PMBUS @64h
+ * FRU AT24C64D @50h
+ * RTC PCF8523 @68h
+ * Clock buffer 9DBL04 @6dh
+ */
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-switch at 71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 0
+ * PCIe 1
+ * PCIe 2
+ * TPM header
+ */
+};
+
+&i2c2 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-switch at 71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 3
+ * PCIe 4
+ */
+};
+
+
+&i2c5 {
+ status = "disabled";
+
+ /* CPU0 PRM 0.7V */
+ /* CPU0 PRM 1.2V CH03 */
+ /* CPU0 PRM 0.8V */
+ /* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+ status = "disabled";
+
+ /* CPU1 PRM 0.7V */
+ /* CPU1 PRM 1.2V CH03 */
+ /* CPU1 PRM 0.8V */
+ /* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+ status = "okay";
+
+ pca9541a at 70 {
+ compatible = "nxp,pca9541";
+ reg = <0x70>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hotswap at 54 {
+ compatible = "ti,lm5066i";
+ reg = <0x54>;
+ };
+ };
+ };
+
+ /* Master selector PCA9541A @70h (other master: CPU0)
+ * LM5066I PMBUS @10h
+ */
+
+ /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
+ power-brick at 61 {
+ compatible = "delta,dps800";
+ reg = <0x61>;
+ };
+
+ /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+ /* CPU0 VR ISL68137 0.8V PMBUS @60h */
+ /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
+ /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
+ /* CPU1 VR ISL68137 0.8V PMBUS @61h */
+ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+};
+
+
+&i2c9 {
+ status = "disabled";
+
+ /* Fan board */
+};
+
+&i2c10 {
+ status = "disabled";
+};
+
+&i2c11 {
+ status = "disabled";
+
+ /* GPU sideband */
+};
+
+&i2c12 {
+ status = "disabled";
+};
+
+&i2c13 {
+ status = "disabled";
+
+ /* MUX PI3USB102
+ * CPU0 debug
+ * CPU1 debug
+ */
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_gpioh_unbiased: gpioi_unbiased {
+ pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+ bias-disable;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+ line_iso_u146_en {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "iso_u164_en";
+ };
+
+ ncsi_mux_en_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "ncsi_mux_en_n";
+ };
+
+ line_bmc_i2c2_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c2_sw_rst_n";
+ };
+
+ line_bmc_i2c5_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c5_sw_rst_n";
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+};
--
2.14.1
More information about the Linux-aspeed
mailing list