[Lguest] [PATCH 2/3] lguest: Physical Address Extension support
Matias Zabaljauregui
zabaljauregui at gmail.com
Sat Sep 27 09:51:46 EST 2008
This patch adds Physical Address Extension support to lguest.
Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index c70e12b..a108c09 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -2,7 +2,6 @@ config LGUEST_GUEST
bool "Lguest guest support"
select PARAVIRT
depends on X86_32
- depends on !X86_PAE
depends on !X86_VOYAGER
select VIRTIO
select VIRTIO_RING
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index d9249a8..fc2331e 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -334,8 +334,12 @@ static void lguest_cpuid(unsigned int *ax,
unsigned int *bx,
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
+#ifdef CONFIG_X86_PAE
+ *dx &= 0x07808151;
+#else
*dx &= 0x07808111;
+#endif
/* The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
@@ -481,15 +485,34 @@ static void lguest_set_pte_at(struct mm_struct
*mm, unsigned long addr,
lazy_hcall(LHCALL_SET_PTE, __pa(mm->pgd), addr, pteval.pte_low);
}
+#ifdef CONFIG_X86_PAE
/* The Guest calls this to set a top-level entry. Again, we set the entry then
* tell the Host which top-level page we changed, and the index of the entry we
* changed. */
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+ *pudp = pudval;
+ /* 32 bytes aligned pdpt address. */
+ lazy_hcall(LHCALL_SET_PUD, __pa(pudp) & 0xFFFFFFE0,
+ (__pa(pudp) & 0x1F) / 8, 0);
+}
+
+/* The Guest calls this to set a PMD entry, when PAE is active */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ *pmdp = pmdval;
+ lazy_hcall(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / 8, 0);
+}
+
+#else
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
*pmdp = pmdval;
lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
(__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
}
+#endif
/* There are a couple of legacy places where the kernel sets a PTE, but we
* don't know the top level any more. This is useless for us, since we don't
@@ -501,12 +524,57 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
* anything changed until we've done the first page table switch. */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
+#ifdef CONFIG_X86_PAE
+ ptep->pte_high = pteval.pte_high;
+ smp_wmb();
+ ptep->pte_low = pteval.pte_low;
+#else
*ptep = pteval;
+#endif
+
+ /* Don't bother with hypercall before initial setup. */
+ if (current_cr3)
+ lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
+}
+
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+ set_64bit((u64 *)ptep, pte.pte);
+
/* Don't bother with hypercall before initial setup. */
if (current_cr3)
lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
}
+static inline void lguest_set_pte_present(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ ptep->pte_low = 0;
+ smp_wmb();
+ ptep->pte_high = pte.pte_high;
+ smp_wmb();
+ ptep->pte_low = pte.pte_low;
+
+ lazy_hcall(LHCALL_SET_PTE, __pa(mm->pgd), addr, pte.pte_low);
+}
+
+void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ ptep->pte_low = 0;
+ smp_wmb();
+ ptep->pte_high = 0;
+
+ lazy_hcall(LHCALL_SET_PTE, current_cr3, addr, 0);
+}
+
+void lguest_pmd_clear(pmd_t *pmdp)
+{
+ lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
@@ -983,6 +1051,14 @@ __init void lguest_init(void)
pv_mmu_ops.set_pte = lguest_set_pte;
pv_mmu_ops.set_pte_at = lguest_set_pte_at;
pv_mmu_ops.set_pmd = lguest_set_pmd;
+
+#ifdef CONFIG_X86_PAE
+ pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+ pv_mmu_ops.set_pte_present = lguest_set_pte_at;
+ pv_mmu_ops.pte_clear = lguest_pte_clear;
+ pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+ pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
pv_mmu_ops.read_cr2 = lguest_read_cr2;
pv_mmu_ops.read_cr3 = lguest_read_cr3;
pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 76f2b36..5d491bb 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
config LGUEST
tristate "Linux hypervisor example code"
- depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX && !X86_VOYAGER
+ depends on X86_32 && EXPERIMENTAL && FUTEX && !X86_VOYAGER
select HVC_DRIVER
---help---
This is a very simple module which allows you to run
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 54d66f0..c5d6678 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -78,6 +78,11 @@ static void do_hcall(struct lg_cpu *cpu, struct
hcall_args *args)
case LHCALL_SET_PMD:
guest_set_pmd(cpu->lg, args->arg1, args->arg2);
break;
+#ifdef CONFIG_X86_PAE
+ case LHCALL_SET_PUD:
+ guest_set_pud(cpu->lg, args->arg1, args->arg2);
+ break;
+#endif
case LHCALL_SET_CLOCKEVENT:
guest_set_clockevent(cpu, args->arg1);
break;
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index f2c641e..1549ba4 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -18,7 +18,7 @@ int init_pagetables(struct page **switcher_page,
unsigned int pages);
struct pgdir
{
- unsigned long gpgdir;
+ pgd_t *gpgdir;
pgd_t *pgdir;
};
@@ -137,6 +137,8 @@ int run_guest(struct lg_cpu *cpu, unsigned long
__user *user);
* in the kernel. */
#define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK)
#define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT)
+#define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK)
+#define pmd_pfn(x) (pmd_val(x) >> PAGE_SHIFT)
/* interrupts_and_traps.c: */
void maybe_do_interrupt(struct lg_cpu *cpu);
@@ -168,6 +170,9 @@ int init_guest_pagetable(struct lguest *lg);
void free_guest_pagetable(struct lguest *lg);
void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable);
void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#ifdef CONFIG_X86_PAE
+void guest_set_pud(struct lguest *lg, unsigned long gpgdir, u32 i);
+#endif
void guest_pagetable_clear_all(struct lg_cpu *cpu);
void guest_pagetable_flush_user(struct lg_cpu *cpu);
void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir,
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 99b6f66..f606d68 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -47,12 +47,17 @@
* (vii) Setting up the page tables initially.
:*/
-
/* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is
* conveniently placed at the top 4MB, so it uses a separate, complete PTE
* page. */
#define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
+/* For PAE we need the PMD index as well. We can use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page. */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1)
+#endif
+
/* We actually need a separate PTE page for each CPU. Remember that after the
* Switcher code itself comes two pages for each CPU, and we don't want this
* CPU's guest to see the pages of any other CPU. */
@@ -73,39 +78,90 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i,
unsigned long vaddr)
{
unsigned int index = pgd_index(vaddr);
+#ifndef CONFIG_X86_PAE
/* We kill any Guest trying to touch the Switcher addresses. */
if (index >= SWITCHER_PGD_INDEX) {
kill_guest(cpu, "attempt to access switcher pages");
index = 0;
}
+#endif
/* Return a pointer index'th pgd entry for the i'th page table. */
return &cpu->lg->pgdirs[i].pgdir[index];
}
+#ifdef CONFIG_X86_PAE
+/* This routine then takes the PGD entry given above, which contains the
+ * address of the PMD page. It then returns a pointer to the PMD entry for the
+ * given address. */
+static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
+{
+ unsigned int index = pmd_index(vaddr);
+ pmd_t *page;
+
+ /* We kill any Guest trying to touch the Switcher addresses. */
+ if (pgd_index(vaddr) == SWITCHER_PGD_INDEX &&
+ index >= SWITCHER_PMD_INDEX) {
+ kill_guest(cpu, "attempt to access switcher pages");
+ index = 0;
+ }
+
+ /* You should never call this if the PGD entry wasn't valid */
+ BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
+
+ page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
+ return &page[index];
+}
+#endif
+
/* This routine then takes the page directory entry returned above, which
* contains the address of the page table entry (PTE) page. It then returns a
* pointer to the PTE entry for the given address. */
-static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
+static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
+#ifdef CONFIG_X86_PAE
+ pmd_t *pmd = spmd_addr(cpu, spgd, vaddr);
+ pte_t *page = __va(pmd_pfn(*pmd) << PAGE_SHIFT);
+
+ /* You should never call this if the PMD entry wasn't valid */
+ BUG_ON(!(pmd_flags(*pmd) & _PAGE_PRESENT));
+#else
pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
+
/* You should never call this if the PGD entry wasn't valid */
BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
- return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
+#endif
+ return &page[pte_index(vaddr)];
}
/* These two functions just like the above two, except they access the Guest
* page tables. Hence they return a Guest address. */
-static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
+static pgd_t *gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
{
unsigned int index = vaddr >> (PGDIR_SHIFT);
- return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index * sizeof(pgd_t);
+ return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index;
+}
+
+#ifdef CONFIG_X86_PAE
+static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
+{
+ unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+ BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
+ return gpage + pmd_index(vaddr) * sizeof(pmd_t);
}
+#endif
-static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+ pgd_t gpgd, unsigned long vaddr)
{
+#ifdef CONFIG_X86_PAE
+ pmd_t gpmd = lgread(cpu,
+ (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
+ unsigned long gpage = pmd_pfn(gpmd) << PAGE_SHIFT;
+#else
unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
- return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
+#endif
+ return gpage + pte_index(vaddr) * sizeof(pte_t);
}
/*:*/
@@ -184,11 +240,24 @@ static void check_gpte(struct lg_cpu *cpu, pte_t gpte)
static void check_gpgd(struct lg_cpu *cpu, pgd_t gpgd)
{
+#ifdef CONFIG_X86_PAE
+ if ((pgd_flags(gpgd) & ~_PAGE_PRESENT) ||
+#else
if ((pgd_flags(gpgd) & ~_PAGE_TABLE) ||
+#endif
(pgd_pfn(gpgd) >= cpu->lg->pfn_limit))
kill_guest(cpu, "bad page directory entry");
}
+#ifdef CONFIG_X86_PAE
+static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
+{
+ if ((pmd_flags(gpmd) & ~_PAGE_TABLE) ||
+ (pmd_pfn(gpmd) >= cpu->lg->pfn_limit))
+ kill_guest(cpu, "bad page middle directory entry");
+}
+#endif
+
/*H:330
* (i) Looking up a page table entry when the Guest faults.
*
@@ -207,14 +276,21 @@ int demand_page(struct lg_cpu *cpu, unsigned
long vaddr, int errcode)
pte_t gpte;
pte_t *spte;
+#ifdef CONFIG_X86_PAE
+ pmd_t *spmd;
+ pmd_t gpmd;
+#endif
+
/* First step: get the top-level Guest page table entry. */
- gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
+ gpgd = lgread(cpu, (unsigned long) gpgd_addr(cpu, vaddr), pgd_t);
+
/* Toplevel not present? We can't map it in. */
if (!(pgd_flags(gpgd) & _PAGE_PRESENT))
return 0;
/* Now look at the matching shadow entry. */
spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
+
if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
@@ -231,9 +307,38 @@ int demand_page(struct lg_cpu *cpu, unsigned long
vaddr, int errcode)
*spgd = __pgd(__pa(ptepage) | pgd_flags(gpgd));
}
+#ifdef CONFIG_X86_PAE
+ gpmd = lgread(cpu, (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
+ /* middle level not present? We can't map it in. */
+ if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+ return 0;
+
+ /* Now look at the matching shadow entry. */
+ spmd = spmd_addr(cpu, *spgd, vaddr);
+
+ if (!(pmd_flags(*spmd) & _PAGE_PRESENT)) {
+ /* No shadow entry: allocate a new shadow PTE page. */
+ unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
+
+ /* This is not really the Guest's fault, but killing it is
+ * simple for this corner case. */
+ if (!ptepage) {
+ kill_guest(cpu, "out of memory allocating pte page");
+ return 0;
+ }
+
+ /* We check that the Guest pmd is OK. */
+ check_gpmd(cpu, gpmd);
+
+ /* And we copy the flags to the shadow PMD entry. The page
+ * number in the shadow PMD is the page we just allocated. */
+ *spmd = __pmd(__pa(ptepage) | pmd_flags(gpmd));
+ }
+#endif
+
/* OK, now we look at the lower level in the Guest page table: keep its
* address, because we might update it later. */
- gpte_ptr = gpte_addr(gpgd, vaddr);
+ gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
gpte = lgread(cpu, gpte_ptr, pte_t);
/* If this page isn't in the Guest page tables, we can't page it in. */
@@ -259,7 +364,7 @@ int demand_page(struct lg_cpu *cpu, unsigned long
vaddr, int errcode)
gpte = pte_mkdirty(gpte);
/* Get the pointer to the shadow PTE entry we're going to set. */
- spte = spte_addr(*spgd, vaddr);
+ spte = spte_addr(cpu, *spgd, vaddr);
/* If there was a valid shadow PTE entry here before, we release it.
* This can happen with a write to a previously read-only entry. */
release_pte(*spte);
@@ -300,15 +405,24 @@ static int page_writable(struct lg_cpu *cpu,
unsigned long vaddr)
{
pgd_t *spgd;
unsigned long flags;
+#ifdef CONFIG_X86_PAE
+ pmd_t *spmd;
+#endif
/* Look at the current top level entry: is it present? */
spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
return 0;
+#ifdef CONFIG_X86_PAE
+ spmd = spmd_addr(cpu, *spgd, vaddr);
+ if (!(pmd_flags(*spmd) & _PAGE_PRESENT))
+ return 0;
+#endif
+
/* Check the flags on the pte entry itself: it must be present and
* writable. */
- flags = pte_flags(*(spte_addr(*spgd, vaddr)));
+ flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
}
@@ -322,8 +436,44 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
kill_guest(cpu, "bad stack page %#lx", vaddr);
}
+#ifdef CONFIG_X86_PAE
+static void release_pmd(pmd_t *spmd)
+{
+ /* If the entry's not present, there's nothing to release. */
+ if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+ unsigned int i;
+ pte_t *ptepage = __va(pmd_pfn(*spmd) << PAGE_SHIFT);
+ /* For each entry in the page, we might need to release it. */
+ for (i = 0; i < PTRS_PER_PTE; i++)
+ release_pte(ptepage[i]);
+ /* Now we can free the page of PTEs */
+ free_page((long)ptepage);
+ /* And zero out the PMD entry so we never release it twice. */
+ *spmd = __pmd(0);
+ }
+}
+
/*H:450 If we chase down the release_pgd() code, it looks like this: */
-static void release_pgd(struct lguest *lg, pgd_t *spgd)
+static void release_pgd(pgd_t *spgd)
+{
+ /* If the entry's not present, there's nothing to release. */
+ if (pgd_flags(*spgd) & _PAGE_PRESENT) {
+ unsigned int i;
+ pmd_t *pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+ for (i = 0; i < PTRS_PER_PMD; i++)
+ release_pmd(&pmdpage[i]);
+
+ /* Now we can free the page of PMDs */
+ free_page((long)pmdpage);
+ /* And zero out the PGD entry we we never release it twice. */
+ *spgd = __pgd(0);
+ }
+}
+
+#else /* !CONFIG_X86_PAE */
+
+/*H:450 If we chase down the release_pgd() code, it looks like this: */
+static void release_pgd(pgd_t *spgd)
{
/* If the entry's not present, there's nothing to release. */
if (pgd_flags(*spgd) & _PAGE_PRESENT) {
@@ -342,6 +492,8 @@ static void release_pgd(struct lguest *lg, pgd_t *spgd)
}
}
+#endif
+
/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
* hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
* It simply releases every PTE page from 0 up to the Guest's kernel
address. */
@@ -350,7 +502,7 @@ static void flush_user_mappings(struct lguest *lg, int idx)
unsigned int i;
/* Release every pgd entry up to the kernel's address. */
for (i = 0; i < pgd_index(lg->kernel_address); i++)
- release_pgd(lg, lg->pgdirs[idx].pgdir + i);
+ release_pgd(lg->pgdirs[idx].pgdir + i);
}
/*H:440 (v) Flushing (throwing away) page tables,
@@ -370,23 +522,34 @@ unsigned long guest_pa(struct lg_cpu *cpu,
unsigned long vaddr)
pgd_t gpgd;
pte_t gpte;
+#ifdef CONFIG_X86_PAE
+ pmd_t gpmd;
+#endif
+
/* First step: get the top-level Guest page table entry. */
- gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
+ gpgd = lgread(cpu, (unsigned long) gpgd_addr(cpu, vaddr), pgd_t);
/* Toplevel not present? We can't map it in. */
if (!(pgd_flags(gpgd) & _PAGE_PRESENT))
kill_guest(cpu, "Bad address %#lx", vaddr);
- gpte = lgread(cpu, gpte_addr(gpgd, vaddr), pte_t);
+#ifdef CONFIG_X86_PAE
+ gpmd = lgread(cpu, (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
+ if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+ kill_guest(cpu, "Bad address %#lx", vaddr);
+#endif
+
+ gpte = lgread(cpu, (unsigned long) gpte_addr(cpu, gpgd, vaddr), pte_t);
if (!(pte_flags(gpte) & _PAGE_PRESENT))
kill_guest(cpu, "Bad address %#lx", vaddr);
return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
}
+
/* We keep several page tables. This is a simple routine to find the page
* table (if any) corresponding to this top-level address the Guest has given
* us. */
-static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
+static unsigned int find_pgdir(struct lguest *lg, pgd_t *pgtable)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
@@ -399,11 +562,13 @@ static unsigned int find_pgdir(struct lguest
*lg, unsigned long pgtable)
* allocate a new one (and so the kernel parts are not there), we set
* blank_pgdir. */
static unsigned int new_pgdir(struct lg_cpu *cpu,
- unsigned long gpgdir,
+ pgd_t *gpgdir,
int *blank_pgdir)
{
unsigned int next;
-
+#ifdef CONFIG_X86_PAE
+ pmd_t *pmd_table;
+#endif
/* We pick one entry at random to throw out. Choosing the Least
* Recently Used might be better, but this is easy. */
next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
@@ -414,10 +579,27 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
/* If the allocation fails, just keep using the one we have */
if (!cpu->lg->pgdirs[next].pgdir)
next = cpu->cpu_pgd;
+#ifdef CONFIG_X86_PAE
+ else {
+ /* In PAE mode, allocate a pmd page and populate the
+ * last pgd entry. */
+ pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
+ if (!pmd_table)
+ next = cpu->cpu_pgd;
+ else {
+ set_pgd(cpu->lg->pgdirs[next].pgdir +
+ SWITCHER_PGD_INDEX,
+ __pgd(__pa(pmd_table) | _PAGE_PRESENT));
+
+ /* This is a blank page, so there are no kernel
+ * mappings: caller must map the stack! */
+ *blank_pgdir = 1;
+ }
+ }
+#else
else
- /* This is a blank page, so there are no kernel
- * mappings: caller must map the stack! */
*blank_pgdir = 1;
+#endif
}
/* Record which Guest toplevel this shadows. */
cpu->lg->pgdirs[next].gpgdir = gpgdir;
@@ -437,11 +619,11 @@ void guest_new_pagetable(struct lg_cpu *cpu,
unsigned long pgtable)
int newpgdir, repin = 0;
/* Look to see if we have this one already. */
- newpgdir = find_pgdir(cpu->lg, pgtable);
+ newpgdir = find_pgdir(cpu->lg, (pgd_t *)pgtable);
/* If not, we allocate or mug an existing one: if it's a fresh one,
* repin gets set to 1. */
if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
- newpgdir = new_pgdir(cpu, pgtable, &repin);
+ newpgdir = new_pgdir(cpu, (pgd_t *)pgtable, &repin);
/* Change the current pgd index to the new one. */
cpu->cpu_pgd = newpgdir;
/* If it was completely blank, we map in the Guest kernel stack */
@@ -456,12 +638,28 @@ static void release_all_pagetables(struct lguest *lg)
{
unsigned int i, j;
+#ifdef CONFIG_X86_PAE
+ pgd_t *spgd;
+ pmd_t *pmdpage;
+#endif
+
/* Every shadow pagetable this Guest has */
for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
- if (lg->pgdirs[i].pgdir)
+ if (lg->pgdirs[i].pgdir) {
/* Every PGD entry except the Switcher at the top */
for (j = 0; j < SWITCHER_PGD_INDEX; j++)
- release_pgd(lg, lg->pgdirs[i].pgdir + j);
+ release_pgd(lg->pgdirs[i].pgdir + j);
+#ifdef CONFIG_X86_PAE
+ /* Get the last pmd page. */
+ spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
+ pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+ /* And release the pmd entries of that pmd page,
+ * except for the switcher pmd. */
+ for (i = 0; i < SWITCHER_PMD_INDEX; i++)
+ release_pmd(&pmdpage[i]);
+#endif
+ }
}
/* We also throw away everything when a Guest tells us it's changed a kernel
@@ -503,23 +701,38 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
/* Look up the matching shadow page directory entry. */
pgd_t *spgd = spgd_addr(cpu, idx, vaddr);
+#ifdef CONFIG_X86_PAE
+ pmd_t *spmd;
+#endif
+
/* If the top level isn't present, there's no entry to update. */
if (pgd_flags(*spgd) & _PAGE_PRESENT) {
- /* Otherwise, we start by releasing the existing entry. */
- pte_t *spte = spte_addr(*spgd, vaddr);
- release_pte(*spte);
-
- /* If they're setting this entry as dirty or accessed, we might
- * as well put that entry they've given us in now. This shaves
- * 10% off a copy-on-write micro-benchmark. */
- if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
- check_gpte(cpu, gpte);
- *spte = gpte_to_spte(cpu, gpte,
- pte_flags(gpte) & _PAGE_DIRTY);
- } else
- /* Otherwise kill it and we can demand_page() it in
- * later. */
- *spte = __pte(0);
+
+#ifdef CONFIG_X86_PAE
+ spmd = spmd_addr(cpu, *spgd, vaddr);
+ if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+#endif
+
+ /* Otherwise, we start by releasing
+ * the existing entry. */
+ pte_t *spte = spte_addr(cpu, *spgd, vaddr);
+ release_pte(*spte);
+
+ /* If they're setting this entry as dirty or accessed,
+ * we might as well put that entry they've given us
+ * in now. This shaves 10% off a
+ * copy-on-write micro-benchmark. */
+ if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
+ check_gpte(cpu, gpte);
+ *spte = gpte_to_spte(cpu, gpte,
+ pte_flags(gpte) & _PAGE_DIRTY);
+ } else
+ /* Otherwise kill it and we can demand_page()
+ * it in later. */
+ *spte = __pte(0);
+#ifdef CONFIG_X86_PAE
+ }
+#endif
}
}
@@ -545,7 +758,7 @@ void guest_set_pte(struct lg_cpu *cpu,
do_set_pte(cpu, i, vaddr, gpte);
} else {
/* Is this page table one we have a shadow for? */
- int pgdir = find_pgdir(cpu->lg, gpgdir);
+ int pgdir = find_pgdir(cpu->lg, (pgd_t *)gpgdir);
if (pgdir != ARRAY_SIZE(cpu->lg->pgdirs))
/* If so, do the update. */
do_set_pte(cpu, pgdir, vaddr, gpte);
@@ -566,9 +779,31 @@ void guest_set_pte(struct lg_cpu *cpu,
*
* So with that in mind here's our code to to update a (top-level) PGD entry:
*/
-void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
+
+#ifdef CONFIG_X86_PAE
+void guest_set_pud(struct lguest *lg, unsigned long pudp, u32 idx)
+{
+ int pgdir;
+ pgd_t *gpgdir = (pgd_t *) pudp;
+
+ /* If they're talking about a page table we have a shadow for... */
+ pgdir = find_pgdir(lg, gpgdir);
+ if (pgdir < ARRAY_SIZE(lg->pgdirs))
+ /* ... throw it away. */
+ release_pgd(lg->pgdirs[pgdir].pgdir + idx);
+}
+
+void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
+{
+ release_all_pagetables(lg);
+}
+
+#else /*!CONFIG_X86_PAE*/
+
+void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
{
int pgdir;
+ pgd_t *gpgdir = (pgd_t *) pmdp;
/* The kernel seems to try to initialize this early on: we ignore its
* attempts to map over the Switcher. */
@@ -579,8 +814,9 @@ void guest_set_pmd(struct lguest *lg, unsigned
long gpgdir, u32 idx)
pgdir = find_pgdir(lg, gpgdir);
if (pgdir < ARRAY_SIZE(lg->pgdirs))
/* ... throw it away. */
- release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
+ release_pgd(lg->pgdirs[pgdir].pgdir + idx);
}
+#endif
/* Once we know how much memory we have we can construct simple identity
* (which set virtual == physical) and linear mappings
@@ -594,8 +830,14 @@ static unsigned long setup_pagetables(unsigned long mem,
{
pgd_t *pgdir;
pte_t *linear;
- unsigned int mapped_pages, i, linear_pages, phys_linear;
-
+ unsigned int mapped_pages, i, linear_pages;
+
+#ifdef CONFIG_X86_PAE
+ u64 *pmds;
+ unsigned int j;
+#else
+ unsigned int phys_linear;
+#endif
/* We have mapped_pages frames to map, so we need
* linear_pages page tables to map them. */
mapped_pages = mem / PAGE_SIZE;
@@ -607,14 +849,26 @@ static unsigned long setup_pagetables(unsigned long mem,
/* Now we use the next linear_pages pages as pte pages */
linear = (void *)pgdir - linear_pages * PAGE_SIZE;
+#ifdef CONFIG_X86_PAE
+ pmds = (void *)linear - PAGE_SIZE;
+ #endif
+
/* Linear mapping is easy: put every page's address into the
* mapping in order. */
for (i = 0; i < mapped_pages; i++)
set_pte(&linear[i], pfn_pte(i,
__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER)));
+#ifdef CONFIG_X86_PAE
/* The top level points to the linear page table pages above.
* We setup the identity and linear mappings here. */
+ for (i = 0, j = 0; i < mapped_pages; i += PTRS_PER_PTE, j++) {
+ pmds[j] = ((unsigned long)(linear+i) - mem_base) |
+ _PAGE_PRESENT | _PAGE_RW | _PAGE_USER;
+ }
+ pgdir[0] = pgdir[3] = __pgd((((u32)pmds) - mem_base) | _PAGE_PRESENT);
+
+#else
phys_linear = (unsigned long)linear - mem_base;
for (i = 0; i < mapped_pages; i += PTRS_PER_PTE)
pgdir[i / PTRS_PER_PTE] =
@@ -622,6 +876,8 @@ static unsigned long setup_pagetables(unsigned long mem,
__pgd((phys_linear + i * sizeof(pte_t)) |
(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+#endif
+
/* We return the top level (guest-physical) address: the kernel needs
* to know where it is. */
return (unsigned long)pgdir - mem_base;
@@ -636,6 +892,11 @@ int init_guest_pagetable(struct lguest *lg)
unsigned long initrd_size = 0, mem = 0;
struct boot_params *boot = (struct boot_params *) lg->mem_base;
+#ifdef CONFIG_X86_PAE
+ pgd_t *pgd;
+ pmd_t *pmd_table;
+#endif
+
/* Get the guest memory size and the ramdisk size
* from the boot header located at lg->mem_base*/
if (copy_from_user(&mem, &boot->e820_map[0].size, 8))
@@ -645,11 +906,22 @@ int init_guest_pagetable(struct lguest *lg)
/* We start on the first shadow page table, and give it a blank PGD
* page. */
- lg->pgdirs[0].gpgdir = setup_pagetables(mem,
+ lg->pgdirs[0].gpgdir = (pgd_t *) setup_pagetables(mem,
initrd_size, (unsigned long) lg->mem_base);
lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
if (!lg->pgdirs[0].pgdir)
return -ENOMEM;
+#ifdef CONFIG_X86_PAE
+ pgd = lg->pgdirs[0].pgdir;
+ pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
+ if (!pmd_table)
+ return -ENOMEM;
+
+ set_pgd(pgd + SWITCHER_PGD_INDEX, __pgd(__pa(pmd_table)
+ | _PAGE_PRESENT));
+#endif
+
+
lg->cpus[0].cpu_pgd = 0;
return 0;
}
@@ -657,21 +929,36 @@ int init_guest_pagetable(struct lguest *lg)
/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
void page_table_guest_data_init(struct lg_cpu *cpu)
{
+#ifdef CONFIG_X86_PAE
+ const unsigned long reserve_mb = 2;
+#else
+ const unsigned long reserve_mb = 4;
+#endif
+
/* We get the kernel address: above this is all kernel memory. */
if (get_user(cpu->lg->kernel_address,
- &cpu->lg->lguest_data->kernel_address)
- /* We tell the Guest that it can't use the top 4MB of virtual
- * addresses used by the Switcher. */
- || put_user(4U*1024*1024, &cpu->lg->lguest_data->reserve_mem)
- || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir))
+ &cpu->lg->lguest_data->kernel_address)
+ /* We tell the Guest that it can't use the top 2 or 4 MB
+ * of virtual addresses used by the Switcher. */
+ || put_user(reserve_mb * 1024 * 1024,
+ &cpu->lg->lguest_data->reserve_mem)
+ || put_user((unsigned long) cpu->lg->pgdirs[0].gpgdir,
+ &cpu->lg->lguest_data->pgdir))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
/* In flush_user_mappings() we loop from 0 to
* "pgd_index(lg->kernel_address)". This assumes it won't hit the
* Switcher mappings, so check that now. */
+#ifdef CONFIG_X86_PAE
+ if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX)
+ if (pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
+ kill_guest(cpu, "bad kernel address %#lx",
+ cpu->lg->kernel_address);
+#else
if (pgd_index(cpu->lg->kernel_address) >= SWITCHER_PGD_INDEX)
kill_guest(cpu, "bad kernel address %#lx",
cpu->lg->kernel_address);
+#endif
}
/* When a Guest dies, our cleanup is fairly simple. */
@@ -695,15 +982,28 @@ void free_guest_pagetable(struct lguest *lg)
void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
{
pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
- pgd_t switcher_pgd;
pte_t regs_pte;
unsigned long pfn;
+#ifdef CONFIG_X86_PAE
+ pmd_t switcher_pmd;
+ pmd_t *pmd_table;
+
+ switcher_pmd = pfn_pmd(__pa(switcher_pte_page) >>
+ PAGE_SHIFT, __pgprot(__PAGE_KERNEL));
+ pmd_table = __va(pgd_pfn(cpu->lg->
+ pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
+ << PAGE_SHIFT);
+ pmd_table[SWITCHER_PMD_INDEX] = switcher_pmd;
+
+#else
+ pgd_t switcher_pgd;
+
/* Make the last PGD entry for this Guest point to the Switcher's PTE
* page for this CPU (with appropriate flags). */
switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL);
-
cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
+#endif
/* We also change the Switcher PTE page. When we're running the Guest,
* we want the Guest's "regs" page to appear where the first Switcher
@@ -714,7 +1014,8 @@ void map_switcher_in_guest(struct lg_cpu *cpu,
struct lguest_pages *pages)
* again. */
pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
- switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
+ switcher_pte_page[(unsigned long)pages / PAGE_SIZE % PTRS_PER_PTE]
+ = regs_pte;
}
/*:*/
@@ -723,7 +1024,7 @@ static void free_switcher_pte_pages(void)
unsigned int i;
for_each_possible_cpu(i)
- free_page((long)switcher_pte_page(i));
+ free_page((long)switcher_pte_page(i));
}
/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
index be4a724..ad08f70 100644
--- a/include/asm-x86/lguest.h
+++ b/include/asm-x86/lguest.h
@@ -17,8 +17,13 @@
/* Pages for switcher itself, then two pages per cpu */
#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * NR_CPUS)
+#ifdef CONFIG_X86_PAE
+/* We map at -2M for ease of mapping into the guest (one PTE page). */
+#define SWITCHER_ADDR 0xFFE00000
+#else
/* We map at -4M for ease of mapping into the guest (one PTE page). */
#define SWITCHER_ADDR 0xFFC00000
+#endif
/* Found in switcher.S */
extern unsigned long default_idt_entries[];
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index a3241f2..c0860dc 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -17,6 +17,7 @@
#define LHCALL_SET_PMD 15
#define LHCALL_LOAD_TLS 16
#define LHCALL_NOTIFY 17
+#define LHCALL_SET_PUD 18
#define LGUEST_TRAP_ENTRY 0x1F
@@ -32,7 +33,7 @@
* to make requests of the Host Itself.
*
* Our hypercall mechanism uses the highest unused trap code (traps 32 and
- * above are used by real hardware interrupts). Fifteen hypercalls are
+ * above are used by real hardware interrupts). Eighteen hypercalls are
* available: the hypercall number is put in the %eax register, and the
* arguments (when required) are placed in %edx, %ebx and %ecx. If a return
* value makes sense, it's returned in %eax.
More information about the Lguest
mailing list