[PATCH] ARM: dts: omap3-devkit8000: fix NAND memory binding
Florian Vaussard
florian.vaussard at epfl.ch
Fri May 31 23:49:31 EST 2013
Hello,
Gentle ping. Does someone has any comments on this fix? Can someone
tests on the real hardware?
Regards,
Florian
On 05/23/2013 10:11 AM, Florian Vaussard wrote:
> Commit d36b4cd 'ARM: OMAP2+: Add additional GPMC timing parameters'
> updated GPMC binding, but omap3-devkit8000 was not updated accordingly,
> resulting in a broken configuration.
>
> Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
> ---
> arch/arm/boot/dts/omap3-devkit8000.dts | 29 +++++++++++++++--------------
> 1 files changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
> index 8a5cdcc..e5b35f5 100644
> --- a/arch/arm/boot/dts/omap3-devkit8000.dts
> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
> @@ -123,20 +123,21 @@
> reg = <0 0 0>; /* CS0, offset 0 */
> nand-bus-width = <16>;
>
> - gpmc,sync-clk = <0>;
> - gpmc,cs-on = <0>;
> - gpmc,cs-rd-off = <44>;
> - gpmc,cs-wr-off = <44>;
> - gpmc,adv-on = <6>;
> - gpmc,adv-rd-off = <34>;
> - gpmc,adv-wr-off = <44>;
> - gpmc,we-off = <40>;
> - gpmc,oe-off = <54>;
> - gpmc,access = <64>;
> - gpmc,rd-cycle = <82>;
> - gpmc,wr-cycle = <82>;
> - gpmc,wr-access = <40>;
> - gpmc,wr-data-mux-bus = <0>;
> + gpmc,device-nand;
> + gpmc,sync-clki-ps = <0>;
> + gpmc,cs-on-ns = <0>;
> + gpmc,cs-rd-off-ns = <44>;
> + gpmc,cs-wr-off-ns = <44>;
> + gpmc,adv-on-ns = <6>;
> + gpmc,adv-rd-off-ns = <34>;
> + gpmc,adv-wr-off-ns = <44>;
> + gpmc,we-off-ns = <40>;
> + gpmc,oe-off-ns = <54>;
> + gpmc,access-ns = <64>;
> + gpmc,rd-cycle-ns = <82>;
> + gpmc,wr-cycle-ns = <82>;
> + gpmc,wr-access-ns = <40>;
> + gpmc,wr-data-mux-bus-ns = <0>;
>
> #address-cells = <1>;
> #size-cells = <1>;
>
--
Florian Vaussard
EPFL - STI - IMT - LSRO1
MEB330 - Station 9
1015 Lausanne / Switzerland
tel: +41 21 693 78 39
fax: +41 21 693 78 07
http://lsro.epfl.ch
More information about the devicetree-discuss
mailing list