[PATCH 1/2] ahci: make ahci_transmit_led_message into a function pointer
Mark Langsdorf
mark.langsdorf at calxeda.com
Fri May 31 06:17:30 EST 2013
Create a new ata_port_operations function pointer called
transmit_led_message and give it the default value of
ahci_transmit_led_message. This allows AHCI controllers with
non-standard LED interfaces to use the existing em_ interface.
Signed-off-by: Mark Langsdorf <mark.langsdorf at calxeda.com>
---
drivers/ata/libahci.c | 11 ++++++-----
include/linux/libata.h | 3 +++
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 34c8216..0c36360 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -173,6 +173,7 @@ struct ata_port_operations ahci_ops = {
.em_store = ahci_led_store,
.sw_activity_show = ahci_activity_show,
.sw_activity_store = ahci_activity_store,
+ .transmit_led_message = ahci_transmit_led_message,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
@@ -774,7 +775,7 @@ static void ahci_start_port(struct ata_port *ap)
/* EM Transmit bit maybe busy during init */
for (i = 0; i < EM_MAX_RETRY; i++) {
- rc = ahci_transmit_led_message(ap,
+ rc = ap->ops->transmit_led_message(ap,
emp->led_state,
4);
if (rc == -EBUSY)
@@ -915,7 +916,7 @@ static void ahci_sw_activity_blink(unsigned long arg)
led_message |= (1 << 16);
}
spin_unlock_irqrestore(ap->lock, flags);
- ahci_transmit_led_message(ap, led_message, 4);
+ ap->ops->transmit_led_message(ap, led_message, 4);
}
static void ahci_init_sw_activity(struct ata_link *link)
@@ -1044,7 +1045,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
if (emp->blink_policy)
state &= ~EM_MSG_LED_VALUE_ACTIVITY;
- return ahci_transmit_led_message(ap, state, size);
+ return ap->ops->transmit_led_message(ap, state, size);
}
static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
@@ -1063,7 +1064,7 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
/* set the LED to OFF */
port_led_state &= EM_MSG_LED_VALUE_OFF;
port_led_state |= (ap->port_no | (link->pmp << 8));
- ahci_transmit_led_message(ap, port_led_state, 4);
+ ap->ops->transmit_led_message(ap, port_led_state, 4);
} else {
link->flags |= ATA_LFLAG_SW_ACTIVITY;
if (val == BLINK_OFF) {
@@ -1071,7 +1072,7 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
port_led_state &= EM_MSG_LED_VALUE_OFF;
port_led_state |= (ap->port_no | (link->pmp << 8));
port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
- ahci_transmit_led_message(ap, port_led_state, 4);
+ ap->ops->transmit_led_message(ap, port_led_state, 4);
}
}
emp->blink_policy = val;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index eae7a05..1d09b65 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -908,6 +908,9 @@ struct ata_port_operations {
ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
ssize_t (*sw_activity_store)(struct ata_device *dev,
enum sw_activity val);
+ ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state,
+ ssize_t size);
+
/*
* Obsolete
*/
--
1.8.1.4
More information about the devicetree-discuss
mailing list