[PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT

[Magnus Damm]

Hi Linus,

On Fri, May 24, 2013 at 5:59 PM, Linus Walleij <linus.walleij at linaro.org> wrote:
> On Tue, May 21, 2013 at 2:14 PM, Laurent Pinchart
> <laurent.pinchart+renesas at ideasonboard.com> wrote:
>
>> Reference the st1232 reset GPIO from the device tree and remove it from
>> board code.
>>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
>
>> +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
>> @@ -43,6 +43,7 @@
>>                 interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
>>                 pinctrl-0 = <&st1232_pins>;
>>                 pinctrl-names = "default";
>> +               gpios = <&pfc 166 1>;
>
> Just as a random example this becomes:
>
> gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
>
> Which is WAAAY more readable.

Yes, agreed, even grumpy me starts thinking this looks good. =)

>> +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
>> @@ -158,7 +158,6 @@ clock_error:
>>   */
>>  static void __init eva_init(void)
>>  {
>> -
>>         r8a7740_clock_init(MD_CK0 | MD_CK2);
>>         eva_clock_init();
>>
>> @@ -171,12 +170,6 @@ static void __init eva_init(void)
>>
>>         r8a7740_add_standard_devices_dt();
>>
>> -       /*
>> -        * Touchscreen
>> -        * TODO: Move reset GPIO over to .dts when we can reference it
>> -        */
>> -       gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
>> -
>
> Not really my business but I guess the driver is already augmented to pick its
> GPIO from the device tree in this case? And are you willingly breaking
> non-DT boots or something?

Regarding dependency handing of driver and board code, I believe
Laurent has us covered.

As for breaking non-DT boot, under mach-shmobile the code for DT
"-reference" board support is DT only so judging by the file name this
kind of change should be fine.

Thanks,

/ magnus