[PATCH 0/6] U300 device tree clocks

Linus Walleij linus.walleij at stericsson.com
Fri May 24 03:31:22 EST 2013


From: Linus Walleij <linus.walleij at linaro.org>

The following patch set converts all the U300 clocks to be probed
from the device tree. We first move the syscon memory range to the
device tree, then we group the clocks under it.

This goes on top of the previous device tree and multiplatform
series for the U300.

Linus Walleij (6):
  ARM: u300: add syscon node
  ARM: u300: remove register definition file
  clk: move the U300 fixed and fixed-factor to DT
  i2c: stu300: do not request a specific clock name
  ARM: u300: move the gated system controller clocks to DT
  ARM: u300: convert MMC/SD clock to device tree

 Documentation/devicetree/bindings/arm/ste-u300.txt |  30 +-
 .../bindings/clock/ste-u300-syscon-clock.txt       |  80 +++++
 arch/arm/boot/dts/ste-u300.dts                     | 204 +++++++++++
 arch/arm/mach-u300/core.c                          | 135 +++++++-
 arch/arm/mach-u300/regulator.c                     |  21 +-
 arch/arm/mach-u300/timer.c                         |   2 +-
 arch/arm/mach-u300/u300-regs.h                     | 165 ---------
 drivers/clk/clk-u300.c                             | 375 +++++++++++++--------
 drivers/i2c/busses/i2c-stu300.c                    |   4 +-
 9 files changed, 702 insertions(+), 314 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
 delete mode 100644 arch/arm/mach-u300/u300-regs.h

-- 
1.7.11.3



More information about the devicetree-discuss mailing list