[PATCH v2 4/5] ARM: dts: OMAP2+: header file for pinctrl constants

Florian Vaussard florian.vaussard at epfl.ch
Fri May 24 01:37:00 EST 2013


Most of the constants are taken from arch/arm/mach-omap2/mux.h.

Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
---
 include/dt-bindings/pinctrl/omap.h |   54 ++++++++++++++++++++++++++++++++++++
 1 files changed, 54 insertions(+), 0 deletions(-)
 create mode 100644 include/dt-bindings/pinctrl/omap.h

diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
new file mode 100644
index 0000000..253ce95
--- /dev/null
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -0,0 +1,54 @@
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0      0
+#define OMAP_MUX_MODE1      1
+#define OMAP_MUX_MODE2      2
+#define OMAP_MUX_MODE3      3
+#define OMAP_MUX_MODE4      4
+#define OMAP_MUX_MODE5      5
+#define OMAP_MUX_MODE6      6
+#define OMAP_MUX_MODE7      7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA			(1 << 3)
+#define OMAP_PULL_UP			(1 << 4)
+#define OMAP_ALTELECTRICALSEL		(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN			(1 << 8)
+#define OMAP_OFF_EN			(1 << 9)
+#define OMAP_OFFOUT_EN			(1 << 10)
+#define OMAP_OFFOUT_VAL			(1 << 11)
+#define OMAP_OFF_PULL_EN		(1 << 12)
+#define OMAP_OFF_PULL_UP		(1 << 13)
+#define OMAP_WAKEUP_EN			(1 << 14)
+
+/* 44xx specific mux bit defines */
+#define OMAP_WAKEUP_EVENT		(1 << 15)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT			0
+#define OMAP_PIN_OUTPUT_PULLUP		(OMAP_PIN_OUTPUT | OMAP_PULL_ENA \
+						| OMAP_PULL_UP)
+#define OMAP_PIN_OUTPUT_PULLDOWN	(OMAP_PIN_OUTPUT | OMAP_PULL_ENA)
+#define OMAP_PIN_INPUT			OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
+						| OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE		0
+#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
+						| OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+						| OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
+
-- 
1.7.5.4



More information about the devicetree-discuss mailing list