[PATCH v3] media: i2c: tvp514x: add OF support
Hans Verkuil
hverkuil at xs4all.nl
Thu May 23 19:45:13 EST 2013
On Tue 14 May 2013 13:00:36 Lad Prabhakar wrote:
> From: Lad, Prabhakar <prabhakar.csengg at gmail.com>
>
> add OF support for the tvp514x driver. Alongside this patch
> removes unnecessary header file inclusion and sorts them alphabetically.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg at gmail.com>
> Cc: Hans Verkuil <hans.verkuil at cisco.com>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab at redhat.com>
> Cc: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
> Cc: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Cc: Sakari Ailus <sakari.ailus at iki.fi>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Rob Landley <rob at landley.net>
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: linux-doc at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: davinci-linux-open-source at linux.davincidsp.com
> ---
> Tested on da850-evm.
>
> RFC v1: https://patchwork.kernel.org/patch/2030061/
> RFC v2: https://patchwork.kernel.org/patch/2061811/
>
> Changes for current version from RFC v2:
> 1: Fixed review comments pointed by Sylwester.
>
> Changes for v2:
> 1: Listed all the compatible property values in the documentation text file.
> 2: Removed "-decoder" from compatible property values.
> 3: Added a reference to the V4L2 DT bindings documentation to explain
> what the port and endpoint nodes are for.
> 4: Fixed some Nits pointed by Laurent.
> 5: Removed unnecessary header file includes and sort them alphabetically.
>
> Changes for v3:
> 1: Rebased on patch https://patchwork.kernel.org/patch/2539411/
>
> .../devicetree/bindings/media/i2c/tvp514x.txt | 45 ++++++++++++
> drivers/media/i2c/tvp514x.c | 74 +++++++++++++++----
> 2 files changed, 103 insertions(+), 16 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
> new file mode 100644
> index 0000000..cc09424
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
> @@ -0,0 +1,45 @@
> +* Texas Instruments TVP514x video decoder
> +
> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
> +digital video decoder that digitizes and decodes all popular baseband analog
> +video formats into digital video component. The tvp514x decoder supports analog-
> +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
> +conversion and decoding of NTSC, PAL and SECAM composite and S-video into
> +component YCbCr.
> +
> +Required Properties :
> +- compatible : value should be either one among the following
> + (a) "ti,tvp5146" for tvp5146 decoder.
> + (b) "ti,tvp5146m2" for tvp5146m2 decoder.
> + (c) "ti,tvp5147" for tvp5147 decoder.
> + (d) "ti,tvp5147m1" for tvp5147m1 decoder.
> +
> +- hsync-active: HSYNC Polarity configuration for endpoint.
> +
> +- vsync-active: VSYNC Polarity configuration for endpoint.
> +
> +- pclk-sample: Clock polarity of the endpoint.
> +
> +
> +For further reading of port node refer Documentation/devicetree/bindings/media/
> +video-interfaces.txt.
> +
> +Example:
> +
> + i2c0 at 1c22000 {
> + ...
> + ...
> + tvp514x at 5c {
> + compatible = "ti,tvp5146";
> + reg = <0x5c>;
> +
> + port {
> + tvp514x_1: endpoint {
> + hsync-active = <1>;
> + vsync-active = <1>;
> + pclk-sample = <0>;
> + };
> + };
> + };
> + ...
> + };
> diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
> index 01d9757..202c8cb 100644
> --- a/drivers/media/i2c/tvp514x.c
> +++ b/drivers/media/i2c/tvp514x.c
> @@ -29,21 +29,16 @@
> *
> */
>
> -#include <linux/i2c.h>
> -#include <linux/slab.h>
> #include <linux/delay.h>
> -#include <linux/videodev2.h>
> +#include <linux/i2c.h>
> #include <linux/module.h>
> -#include <linux/v4l2-mediabus.h>
>
> +#include <media/media-entity.h>
> +#include <media/tvp514x.h>
> #include <media/v4l2-async.h>
> -#include <media/v4l2-device.h>
> -#include <media/v4l2-common.h>
> -#include <media/v4l2-mediabus.h>
> -#include <media/v4l2-chip-ident.h>
> #include <media/v4l2-ctrls.h>
> -#include <media/tvp514x.h>
> -#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-of.h>
Same issue as with other patches: be careful about removing headers, i.e. don't
rely on them being included in other headers. If you use something from a header,
then just include it.
Regards,
Hans
>
> #include "tvp514x_regs.h"
>
> @@ -1056,6 +1051,40 @@ static struct tvp514x_decoder tvp514x_dev = {
>
> };
>
> +static struct tvp514x_platform_data *
> +tvp514x_get_pdata(struct i2c_client *client)
> +{
> + struct tvp514x_platform_data *pdata;
> + struct v4l2_of_endpoint bus_cfg;
> + struct device_node *endpoint;
> + unsigned int flags;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> + return client->dev.platform_data;
> +
> + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> + if (!endpoint)
> + return NULL;
> +
> + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return NULL;
> +
> + v4l2_of_parse_endpoint(endpoint, &bus_cfg);
> + flags = bus_cfg.bus.parallel.flags;
> +
> + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + pdata->hs_polarity = 1;
> +
> + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + pdata->vs_polarity = 1;
> +
> + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> + pdata->clk_polarity = 1;
> +
> + return pdata;
> +}
> +
> /**
> * tvp514x_probe() - decoder driver i2c probe handler
> * @client: i2c driver client device structure
> @@ -1067,19 +1096,20 @@ static struct tvp514x_decoder tvp514x_dev = {
> static int
> tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> + struct tvp514x_platform_data *pdata = tvp514x_get_pdata(client);
> struct tvp514x_decoder *decoder;
> struct v4l2_subdev *sd;
> int ret;
>
> + if (pdata == NULL) {
> + dev_err(&client->dev, "No platform data\n");
> + return -EINVAL;
> + }
> +
> /* Check if the adapter supports the needed features */
> if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> return -EIO;
>
> - if (!client->dev.platform_data) {
> - v4l2_err(client, "No platform data!!\n");
> - return -ENODEV;
> - }
> -
> decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
> if (!decoder)
> return -ENOMEM;
> @@ -1091,7 +1121,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
> sizeof(tvp514x_reg_list_default));
>
> /* Copy board specific information here */
> - decoder->pdata = client->dev.platform_data;
> + decoder->pdata = pdata;
>
> /**
> * Fetch platform specific data, and configure the
> @@ -1239,8 +1269,20 @@ static const struct i2c_device_id tvp514x_id[] = {
>
> MODULE_DEVICE_TABLE(i2c, tvp514x_id);
>
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id tvp514x_of_match[] = {
> + { .compatible = "ti,tvp5146", },
> + { .compatible = "ti,tvp5146m2", },
> + { .compatible = "ti,tvp5147", },
> + { .compatible = "ti,tvp5147m1", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, tvp514x_of_match);
> +#endif
> +
> static struct i2c_driver tvp514x_driver = {
> .driver = {
> + .of_match_table = of_match_ptr(tvp514x_of_match),
> .owner = THIS_MODULE,
> .name = TVP514X_MODULE_NAME,
> },
>
More information about the devicetree-discuss
mailing list