Re: [PATCH V2 1/6] drivers: bus: add a new driver for WEIM
Alexander Shiyan
shc_work at mail.ru
Thu May 23 18:46:46 EST 2013
> The WEIM(Wireless External Interface Module) works like a bus.
> You can attach many different devices on it, such as NOR, onenand.
>
> In the case of i.MX6q-sabreauto, the NOR is connected to WEIM.
>
> This patch also adds the devicetree binding document.
> The driver only works when the devicetree is enabled.
>
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> ---
> Documentation/devicetree/bindings/bus/imx-weim.txt | 50 +++++++
> drivers/bus/Kconfig | 9 ++
> drivers/bus/Makefile | 1 +
> drivers/bus/imx-weim.c | 146 ++++++++++++++++++++
> 4 files changed, 206 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
> create mode 100644 drivers/bus/imx-weim.c
>
> diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
> new file mode 100644
> index 0000000..3db588e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
> @@ -0,0 +1,50 @@
> +Device tree bindings for i.MX Wireless External Interface Module (WEIM)
> +
> +The term "wireless" does not imply that the WEIM is literally an interface
> +without wires. It simply means that this module was originally designed for
> +wireless and mobile applications that use low-power technology.
> +
> +The actual devices are instantiated from the child nodes of a WEIM node.
> +
> +Required properties:
> +
> + - compatible: Should be set to "fsl,imx6q-weim"
> + - reg: A resource specifier for the register space
> + (see the example below)
> + - interrupts: the interrupt number, see the example below.
Where interrupt is used in the driver?
> + - clocks: the clock, see the example below.
> + - #address-cells: Must be set to 2 to allow memory address translation
> + - #size-cells: Must be set to 1 to allow CS address passing
> + - ranges: Must be set up to reflect the memory layout with four
> + integer values for each chip-select line in use:
> +
> + <cs-number> 0 <physical address of mapping> <size>
> +
> +Timing property for child nodes. It is mandatory, not optional.
> +
> + - fsl,weim-cs-timing: The timing array, contains 6 timing values for the
> + child node. We can get the CS index from the child
> + node's "reg" property.
> +
> +Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
> +
> + weim: weim at 021b8000 {
> + compatible = "fsl,imx6q-weim";
> + reg = <0x021b8000 0x4000>;
> + interrupts = <0 14 0x04>;
> + clocks = <&clks 196>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0 0x08000000 0x08000000>;
> +
> + nor at 0,0 {
> + compatible = "cfi-flash";
> + reg = <0 0 0x02000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + bank-width = <2>;
> +
> + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1C022000
> + 0x0000C000 0x1404a38e 0x00000000>;
> + };
> + };
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index b05ecab..488702b 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -4,6 +4,15 @@
>
> menu "Bus devices"
>
> +config IMX_WEIM
> + tristate "Freescale EIM DRIVER"
> + depends on ARCH_MXC
> + help
> + Driver for i.MX6 WEIM controller.
> + The WEIM(Wireless External Interface Module) works like a bus.
> + You can attach many different devices on it, such as NOR, onenand.
> + But now, we only support the Parallel NOR.
> +
> config MVEBU_MBUS
> bool
> depends on PLAT_ORION
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index 3c7b53c..436bbcc 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -2,6 +2,7 @@
> # Makefile for the bus drivers.
> #
>
> +obj-$(CONFIG_IMX_WEIM) += imx-weim.o
> obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
> obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
>
> diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
> new file mode 100644
> index 0000000..b932add
> --- /dev/null
> +++ b/drivers/bus/imx-weim.c
> @@ -0,0 +1,146 @@
> +/*
> + * EIM driver for Freescale's i.MX chips
> + *
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/of_device.h>
> +
> +struct imx_weim {
> + void __iomem *base;
> + struct clk *clk;
> +};
> +
> +static const struct of_device_id weim_id_table[] = {
> + { .compatible = "fsl,imx6q-weim", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, weim_id_table);
> +
> +#define CS_TIMING_LEN 6
> +#define CS_REG_RANGE 0x18
> +
> +/* Parse and set the timing for this device. */
> +static int
> +weim_timing_setup(struct platform_device *pdev, struct device_node *np)
> +{
> + struct imx_weim *weim = platform_get_drvdata(pdev);
> + u32 value[CS_TIMING_LEN];
> + u32 cs_idx;
> + int ret;
> + int i;
> +
> + /* get the CS index from this child node's "reg" property. */
> + ret = of_property_read_u32(np, "reg", &cs_idx);
> + if (ret)
> + return ret;
> +
> + /* The weim has four chip selects. */
> + if (cs_idx > 3)
> + return -EINVAL;
> +
> + ret = of_property_read_u32_array(np, "fsl,weim-cs-timing",
> + value, CS_TIMING_LEN);
> + if (ret)
> + return ret;
> +
> + /* set the timing for WEIM */
> + for (i = 0; i < CS_TIMING_LEN; i++)
> + writel(value[i], weim->base + cs_idx * CS_REG_RANGE + i * 4);
> + return 0;
> +}
> +
> +static int weim_parse_dt(struct platform_device *pdev)
> +{
> + struct device_node *child;
> + int ret;
> +
> + for_each_child_of_node(pdev->dev.of_node, child) {
> + if (!child->name)
> + continue;
> +
> + ret = weim_timing_setup(pdev, child);
> + if (ret)
> + goto parse_fail;
> +
> + if (!of_platform_device_create(child, NULL, &pdev->dev)) {
> + ret = -EINVAL;
> + goto parse_fail;
> + }
> +
> + }
> + return 0;
> +
> +parse_fail:
> + return ret;
> +}
> +
> +static int weim_probe(struct platform_device *pdev)
> +{
> + struct imx_weim *weim;
> + struct resource *res;
> + int ret = -EINVAL;
> +
> + weim = devm_kzalloc(&pdev->dev, sizeof(*weim), GFP_KERNEL);
> + if (!weim) {
> + ret = -ENOMEM;
> + goto weim_err;
> + }
> + platform_set_drvdata(pdev, weim);
> +
> + /* get the resource */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + weim->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(weim->base)) {
> + ret = PTR_ERR(weim->base);
> + goto weim_err;
> + }
> +
> + /* get the clock */
> + weim->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(weim->clk))
> + goto weim_err;
> +
> + clk_prepare_enable(weim->clk);
> +
> + /* parse the device node */
> + ret = weim_parse_dt(pdev);
> + if (ret) {
> + clk_disable_unprepare(weim->clk);
> + goto weim_err;
> + }
> +
> + dev_info(&pdev->dev, "WEIM driver registered.\n");
> + return 0;
> +
> +weim_err:
> + return ret;
> +}
> +
> +static int weim_remove(struct platform_device *pdev)
> +{
> + struct imx_weim *weim = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(weim->clk);
> + return 0;
> +}
> +
> +static struct platform_driver weim_driver = {
> + .driver = {
> + .name = "imx-weim",
> + .of_match_table = weim_id_table,
> + },
> + .probe = weim_probe,
> + .remove = weim_remove,
> +};
> +
> +module_platform_driver(weim_driver);
> +MODULE_AUTHOR("Freescale Semiconductor Inc.");
> +MODULE_DESCRIPTION("i.MX EIM Controller Driver");
> +MODULE_LICENSE("GPL");
> --
---
More information about the devicetree-discuss
mailing list