[PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree

Laurent Pinchart laurent.pinchart at ideasonboard.com
Sat May 18 16:44:30 EST 2013


Hi Guennadi,

On Friday 17 May 2013 14:26:48 Guennadi Liakhovetski wrote:
> Hi Laurent
> 
> On Wed, 15 May 2013, Laurent Pinchart wrote:
> > Add GPIO controller nodes to the r8a7790 core device tree.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > 
> >  arch/arm/boot/dts/r8a7790.dtsi | 54 +++++++++++++++++++++++++++++++++++++
> >  1 file changed, 54 insertions(+)
> 
> Also here a couple of things are missing (presumably, for other SoCs you
> need the same):

Thank you for testing the patch set. I'll integrate the modification in the 
next version for r8a7778, r8a7779 and r8a7790.

As the gpio-ranges property specifies the number of GPIOs handled by the 
controller, what's your opinion on dropping the #gpio-lines property from the 
bindings ?

> diff --git a/arch/arm/boot/dts/r8a7790.dtsi
> b/arch/arm/boot/dts/r8a7790.dtsi
> index 674ee39..cd1a04f 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -51,6 +51,7 @@
>  		interrupts = <0 4 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 0 32>;
>  	};
> 
>  	gpio1: gpio at ffc41000 {
> @@ -60,6 +61,7 @@
>  		interrupts = <0 5 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 32 32>;
>  	};
> 
>  	gpio2: gpio at ffc42000 {
> @@ -69,6 +71,7 @@
>  		interrupts = <0 6 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 64 32>;
>  	};
> 
>  	gpio3: gpio at ffc43000 {
> @@ -78,6 +81,7 @@
>  		interrupts = <0 7 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 96 32>;
>  	};
> 
>  	gpio4: gpio at ffc44000 {
> @@ -87,6 +91,7 @@
>  		interrupts = <0 8 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 128 32>;
>  	};
> 
>  	gpio5: gpio at ffc45000 {
> @@ -96,6 +101,7 @@
>  		interrupts = <0 9 0x4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +		gpio-ranges = <&pfc 0 160 32>;
>  	};
> 
>  	timer {
> @@ -118,6 +124,7 @@
>  	pfc: pfc at e6060000 {
>  		compatible = "renesas,pfc-r8a7790";
>  		reg = <0 0xe6060000 0 0x250>;
> +		#gpio-range-cells = <3>;
>  	};
> 
>  	/* No MMC_CAP_UHS_DDR50 (dual data rate) capability on r8a7790! */

-- 
Regards,

Laurent Pinchart



More information about the devicetree-discuss mailing list