[PATCH v3 5/7] ARM: kirkwood: remove legacy mv643xx_eth board setup
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Tue May 7 01:33:38 EST 2013
With DT support for mv643xx_eth we do not need legacy platform_data
based setup for DT enabled boards. This patch removes eth setup
for all kirkwood DT board files.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Grant Likely <grant.likely at linaro.org>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Rob Landley <rob at landley.net>
Cc: Lennert Buytenhek <buytenh at wantstofly.org>
Cc: David Miller <davem at davemloft.net>
Cc: Florian Fainelli <florian at openwrt.org>
Cc: Arnaud Patard <arnaud.patard at rtp-net.org>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Jean-Francois Moine <moinejf at free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Simon Guinot <simon.guinot at sequanux.org>
Cc: Jamie Lentin <jm at lentin.co.uk>
Cc: Michael Walle <michael at walle.cc>
Cc: Eric Hutter <hutter.eric at gmail.com>
Cc: Joshua Coombs <josh.coombs at gmail.com>
Cc: Willy Tarreau <w at 1wt.eu>
Cc: Simon Baatz <gmbnomis at gmail.com>
Cc: Alan M Butler <alanbutty12 at gmail.com>
Cc: Nigel Roberts <nigel at nobiscuit.com>
Cc: Valentin Longchamp <valentin.longchamp at keymile.com>
Cc: Stefan Peter <s.peter at mpl.ch>
Cc: Arnaud Ebalard <arno at natisbad.org>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
arch/arm/mach-kirkwood/board-dnskw.c | 7 -------
arch/arm/mach-kirkwood/board-dockstar.c | 9 ---------
arch/arm/mach-kirkwood/board-dreamplug.c | 14 --------------
arch/arm/mach-kirkwood/board-goflexnet.c | 9 ---------
arch/arm/mach-kirkwood/board-guruplug.c | 14 --------------
arch/arm/mach-kirkwood/board-ib62x0.c | 9 ---------
arch/arm/mach-kirkwood/board-iconnect.c | 6 ------
arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 16 ----------------
arch/arm/mach-kirkwood/board-km_kirkwood.c | 7 -------
arch/arm/mach-kirkwood/board-lsxl.c | 12 ------------
arch/arm/mach-kirkwood/board-mplcec4.c | 11 -----------
arch/arm/mach-kirkwood/board-ns2.c | 13 -------------
arch/arm/mach-kirkwood/board-openblocks_a6.c | 9 ---------
arch/arm/mach-kirkwood/board-readynas.c | 6 ------
arch/arm/mach-kirkwood/board-ts219.c | 13 -------------
arch/arm/mach-kirkwood/board-usi_topkick.c | 9 ---------
16 files changed, 0 insertions(+), 164 deletions(-)
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index a1aa87f..2af7a95 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,14 +14,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -36,8 +31,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
void __init dnskw_init(void)
{
- kirkwood_ge00_init(&dnskw_ge00_data);
-
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index d7196db..b78032e 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -16,17 +16,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init dockstar_dt_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dockstar_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 0903242..cb7823d 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -13,23 +13,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
void __init dreamplug_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
}
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 9db979a..4213e20 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -18,17 +18,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init goflexnet_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&goflexnet_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
index a857163..d515f64 100644
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ b/arch/arm/mach-kirkwood/board-guruplug.c
@@ -11,23 +11,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
void __init guruplug_dt_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&guruplug_ge00_data);
- kirkwood_ge01_init(&guruplug_ge01_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 9a857ae..6082373 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -13,17 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
void __init ib62x0_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&ib62x0_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index c8ebde4..045668c 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -11,16 +11,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
void __init iconnect_init(void)
{
- kirkwood_ge00_init(&iconnect_ge00_data);
}
static int __init iconnect_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index e5f7041..dc86cf7 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -10,25 +10,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include "common.h"
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
void __init iomega_ix2_200_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
- kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index 44e4605..6b8464b 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -14,15 +14,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init km_kirkwood_init(void)
{
struct clk *sata_clk;
@@ -39,6 +34,4 @@ void __init km_kirkwood_init(void)
sata_clk = clk_get_sys("sata_mv.0", "1");
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
-
- kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 4ec8b7a..1cbcd56 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -14,17 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/*
* On the LS-XHL/LS-CHLv2, the shutdown process is following:
* - Userland monitors key events until the power switch goes to off position
@@ -44,9 +35,6 @@ void __init lsxl_init(void)
* Basic setup. Needs to be called early.
*/
- kirkwood_ge00_init(&lsxl_ge00_data);
- kirkwood_ge01_init(&lsxl_ge01_data);
-
/* register power-off method */
pm_power_off = lsxl_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 7d6dc66..a337ef5 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -11,24 +11,13 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(2),
-};
-
void __init mplcec4_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_ge00_init(&mplcec4_ge00_data);
- kirkwood_ge01_init(&mplcec4_ge01_data);
kirkwood_pcie_init(KW_PCIE0);
}
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index f8f6605..ba3abd6 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -14,22 +14,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include "common.h"
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
void __init ns2_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- if (of_machine_is_compatible("lacie,cloudbox") ||
- of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
- ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- kirkwood_ge00_init(&ns2_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index b11d8fd..120dccf 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -10,17 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init openblocks_a6_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&openblocks_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
index fb42c20..3ab3e0e 100644
--- a/arch/arm/mach-kirkwood/board-readynas.c
+++ b/arch/arm/mach-kirkwood/board-readynas.c
@@ -13,16 +13,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <mach/kirkwood.h>
#include "common.h"
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init netgear_readynas_init(void)
{
- kirkwood_ge00_init(&netgear_readynas_ge00_data);
kirkwood_pcie_init(KW_PCIE0);
}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..854d448 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -18,27 +18,14 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "tsx1x-common.h"
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
void __init qnap_dt_ts219_init(void)
{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 1cc04ec..44a8a6b 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -12,18 +12,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init usi_topkick_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&topkick_ge00_data);
}
--
1.7.2.5
More information about the devicetree-discuss
mailing list