[PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
Benoit Cousson
b-cousson at ti.com
Thu Mar 28 22:03:44 EST 2013
Hi Nishanth,
The patches 1 to 6 looks good to me. Beside the pretty long Cc list,
that should not necessarily contain all the mailing list.
Since you are changing / renaming some DTS files, and to avoid any merge
conflict I will apply only these 6 patches.
DTS and driver changes are in theory orthogonal enough to allow merging
them separately and in any order.
I'll update my branch with these patches ASAP.
Regards,
Benoit
On 03/19/2013 06:53 PM, Nishanth Menon wrote:
> Hi,
> The following version 2 of the series arose from trying to use BeagleBoard-XM
> (OMAP3 variant) for doing CPU DVFS using cpufreq-cpu0. This series enables the
> generic cpufreq-cpu0 driver to be used in device tree enabled boot while
> maintaining support of the legacy omap-cpufreq driver when used in non device
> tree enabled boot.
>
> However, in order to enable complete SoC entitlement for OMAP platforms, with
> this series, key features are still pending on device tree adaptation for OMAP:
> A) clock framework data transition to DT - this should happen soon, so this
> series hacks the clock node for the time being as suggested in review of
> original series[1].
> B) On processors that use voltage controller, voltage processor (VC/VP hardware
> loop using I2C_SR path) - we have started work on transitioning them to
> regulator framework driven by DT.
> C) Adaptive Body Bias and SmartReflex AVS conversion to DT.
>
> As a result of these pending features:
> - OMAP4 TWL6030 and TPS62361 which set voltage ONLY over I2C_SR have no
> regulators associated at the moment - fortunately, we boot at highest voltage,
> so things still work.
> - Missing ABB and AVS implies that for few of the SoCs (3630, OMAP4), I have
> not added those OPPs in DT yet - this also needs alignment with iMX, AM series
> pending work, where certain OPPs need enabling based on efuse programmed
> bit sequences - since it is an add-on work, it is not addressed here.
>
> Note: At this point in time, we do not have DT entries for clock on OMAP
> platforms. Common Clock Framework(CCF) could also control regulators[2].
> Once these conversions are complete, there will be minimal cleanup work to
> switch to the new data structure changes.
>
> Key benefit of the series is to allow all relevant TI platforms now to use a
> single cpufreq driver and equivalent frameworks in addition be part of the
> transition to device tree.
> NOTE: As a result of this series:
> 1. omap-cpufreq will be used only in non device tree boot scenario. we should
> delete this driver once the 100% DT conversion is complete.
> 2. Generic cpufreq-cpu0 will be used only in device tree boot scenario.
> boot systems.
>
> Key changes in version 2:
> - series now rebased on Device tree patches queued for OMAP 3.10
> - cpufreq-cpu0 and omap_cpufreq will co-exist and used depending on
> usage of device tree.
> - minor wording, cleanups for the same.
> - omap3.dtsi and omap4.dtsi now become common dtsi which is used by
> omap34xx.dtsi, omap36xx.dtsi, omap443x.dtsi, omap4460.dtsi as needed.
>
> version 1 of the series:
> http://marc.info/?t=136329485400005&r=1&w=2
> available at:
> https://github.com/nmenon/linux-2.6-playground/commits/push/cpufreq-cpu0-omap-all-v1
>
> [1] Original discussion thread which triggered this series:
> http://marc.info/?l=linux-pm&m=136304313700602&w=2
> https://patchwork.kernel.org/patch/2251841/
> https://patchwork.kernel.org/patch/2251851/
> [2] CCF DVFS patches:
> https://patchwork.kernel.org/patch/2195431/
> https://patchwork.kernel.org/patch/2195421/
> https://patchwork.kernel.org/patch/2195451/
> https://patchwork.kernel.org/patch/2195441/
> https://patchwork.kernel.org/patch/2195461/
>
> Version 2 is now based on for-3.10/dts branch from Benoit:
> http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
> 44fab7a ARM: dts: omap3-devkit8000: Add NAND DT node
>
> Version 2 is also available at:
> https://github.com/nmenon/linux-2.6-playground/commits/push/cpufreq-cpu0-omap-all-v2
> git link: git://github.com/nmenon/linux-2.6-playground.git
> branch: cpufreq-cpu0-omap-all-v2
>
> Test coverage:
> test script: http://pastebin.com/zrr8ptge
> Platforms verified:
> beaglebone(rev A6a) - AM33xx compatible - http://pastebin.com/PUx5h6Jy
> beagleboard (rev C1D) - OMAP3430 compatible - http://pastebin.com/SycCinFb (DT) http://pastebin.com/qwJHw9Ev (no DT)
> omap3-beagle-xm -OMAP3630 compatible - http://pastebin.com/tVEXeVZC
> Pandaboard -(OMAP4430 ES2.2) verified with omapconf - http://pastebin.com/cAtytfW0
> Pandaboard-ES -(OMAP4460 ES1.1) verified with omapconf - http://pastebin.com/3EymNTMp
>
> Nishanth Menon (8):
> ARM: dts: OMAP34xx/35xx: Add CPU OPP table
> ARM: dts: OMAP36xx: Add CPU OPP table
> ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU
> ARM: dts: OMAP443x: Add CPU OPP table
> ARM: dts: omap4-panda: move generic sections to panda-common
> ARM: dts: OMAP4460: Add CPU OPP table
> ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
> cpufreq: OMAP: donot allow to be used with device tree
>
> arch/arm/boot/dts/am3517-evm.dts | 2 +-
> arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
> arch/arm/boot/dts/omap3-beagle-xm.dts | 6 +
> arch/arm/boot/dts/omap3-beagle.dts | 8 +-
> arch/arm/boot/dts/omap3-devkit8000.dts | 2 +-
> arch/arm/boot/dts/omap3-evm.dts | 8 +-
> arch/arm/boot/dts/omap3-igep.dtsi | 2 +-
> arch/arm/boot/dts/omap3-overo.dtsi | 2 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> arch/arm/boot/dts/omap34xx.dtsi | 28 ++++
> arch/arm/boot/dts/omap36xx.dtsi | 13 ++
> arch/arm/boot/dts/omap4-panda-a4.dts | 5 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 251 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap4-panda-es.dts | 3 +-
> arch/arm/boot/dts/omap4-panda.dts | 247 +---------------------------
> arch/arm/boot/dts/omap4-sdp.dts | 2 +-
> arch/arm/boot/dts/omap4-var-som.dts | 2 +-
> arch/arm/boot/dts/omap443x.dtsi | 27 ++++
> arch/arm/boot/dts/omap4460.dtsi | 14 ++
> arch/arm/boot/dts/twl4030.dtsi | 6 +
> arch/arm/mach-omap2/board-generic.c | 5 +
> arch/arm/mach-omap2/cclock33xx_data.c | 2 +-
> arch/arm/mach-omap2/cclock3xxx_data.c | 3 +-
> arch/arm/mach-omap2/cclock44xx_data.c | 3 +-
> drivers/cpufreq/omap-cpufreq.c | 14 ++
> 25 files changed, 399 insertions(+), 260 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap34xx.dtsi
> create mode 100644 arch/arm/boot/dts/omap4-panda-common.dtsi
> create mode 100644 arch/arm/boot/dts/omap443x.dtsi
>
> vmlinux size change information (omap2plus_defconfig + CPUFREQ enabled):
> add/remove: 0/0 grow/shrink: 5/0 up/down: 208/0 (208)
> function old new delta
> omap_cpu_init 360 472 +112
> omap_generic_init 96 140 +44
> omap44xx_clks 5832 5856 +24
> omap3xxx_clks 6720 6744 +24
> omap3xxx_clk_init 1072 1076 +4
>
> non-zero DTB size deltas(bytes):
> old new delta filename
> 10671 10898 +227 omap3-beagle-xm.dtb
> 9947 10190 +243 omap3-beagle.dtb
> 11399 11582 +183 omap3-devkit8000.dtb
> 9731 9974 +243 omap3-evm.dtb
> 10958 11141 +183 omap3-igep0020.dtb
> 10906 11089 +183 omap3-igep0030.dtb
> 10255 10438 +183 omap3-tobi.dtb
> 11361 11544 +183 omap3430-sdp.dtb
> 16270 16361 +91 omap4-panda-a4.dtb
> 16326 16409 +83 omap4-panda-es.dtb
> 16270 16361 +91 omap4-panda.dtb
> 19379 19470 +91 omap4-sdp.dtb
> 12943 13034 +91 omap4-var-som.dtb
>
> Cc: Kevin Hilman <khilman at deeprootsystems.com>
> Cc: Jon Hunter <jon-hunter at ti.com>
> Cc: "Benoît Cousson" <b-cousson at ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: Keerthy <j-keerthy at ti.com>
> Cc: linux-omap at vger.kernel.org
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: cpufreq at vger.kernel.org
> Cc: linux-pm at vger.kernel.org
>
> Regards,
> Nishanth Menon
>
More information about the devicetree-discuss
mailing list