[RFC PATCHv1 4/5] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Thu Mar 28 05:05:03 EST 2013


This commit adds Device Tree details to enable the PCIe interfaces on
Kirkwood.

Note: this commit is not correct. The 6281 Kirkwood has only one PCIe
interface, and the 6282 has two PCIe interfaces, so this Device Tree
change will require some modifications to take this into account.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/boot/dts/kirkwood.dtsi |   49 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 2c738d9..3d2cb12 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -19,6 +19,7 @@
 	ocp at f1000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
 		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -201,5 +202,53 @@
 			clocks = <&gate_clk 4>;
 			status = "disabled";
 		};
+
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
+			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
+				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+			pcie at 1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie at 2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
 	};
 };
-- 
1.7.9.5



More information about the devicetree-discuss mailing list