[PATCH v9 4/4] ARM: dts: Add FIMD DT binding Documentation

[Sylwester Nawrocki]

On 03/25/2013 12:10 PM, Thomas Abraham wrote:
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
>> @@ -0,0 +1,68 @@
>> +Device-Tree bindings for Samsung SoC display controller (FIMD)
[...]
>> +- interrupts : should contain a list of all FIMD IP block interrupts:
>> +  FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier format depends
>> +    on the interrupt controller used.

Since the interrupt order is supposed to be defined by the binding, perhaps
it could be rephrased to something like:

- interrupts : should contain a list of all FIMD IP block interrupts in
  order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier format
  depends on the interrupt controller used.

>> +- interrupt-names : should contain the interrupt names: "fifo", "vsync",
>> +       "lcd_sys", in the same order as they were listed in the interrupts
>> +        property.
>> +
>> +- pinctrl : property defining the pinctrl configurations with a phandle
>> +
>> +- pinctrl-names : "default" state needs to be specified in the fimd node
>> +               The pinctrl bindings defined in
>> +               ../../../pinctrl/pinctrl-bindings.txt must be used to define a
>> +               pinctrl state named "default".

The path should be ../pinctrl/pinctrl-bindings.txt. It probably makes to sense
to either have this one sentence or pinctrl/pinctrl-names properties listed
with their description. So for example

- pinctrl : pin control group to be used for this controller;
- pinctrl-names : should contain "default" entry;

or

The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
to define a pinctrl state named "default".