[PATCH 1/6] of/pci: Provide support for parsing PCI DT ranges property

Andrew Murray andrew.murray at arm.com
Mon Mar 25 21:21:06 EST 2013


On Sat, Mar 23, 2013 at 01:37:04PM +0000, Thomas Petazzoni wrote:
> 
> On Sat, 23 Mar 2013 10:41:56 +0000, Russell King - ARM Linux wrote:
> 
> > Please look at how IORESOURCE_* stuff is defined:
> > #define IORESOURCE_TYPE_BITS    0x00001f00      /* Resource type */
> > #define IORESOURCE_IO           0x00000100      /* PCI/ISA I/O ports */
> > #define IORESOURCE_MEM          0x00000200
> > #define IORESOURCE_REG          0x00000300      /* Register offsets */
> > #define IORESOURCE_IRQ          0x00000400
> > #define IORESOURCE_DMA          0x00000800
> > #define IORESOURCE_BUS          0x00001000
> > 
> > Notice that it's not an array of bits.
> > 
> > So this should be:
> > 		if ((iter.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO) {
> 
> What I've done for the Marvell PCIe driver is:
> 
> +	for_each_of_pci_range(&iter, np) {
> +		unsigned long restype = iter.flags & IORESOURCE_TYPE_BITS;
> +		if (restype == IORESOURCE_IO) {
> [...]
> +		if (restype == IORESOURCE_MEM) {
> [...]

OK I'll update this patch and also include Thierry's suggestions.

Andrew Murray


More information about the devicetree-discuss mailing list