[PATCH V3 00/18] ARM: OMAP2+: GPMC clean-up and DT update

[Ezequiel Garcia]

On Fri, Mar 15, 2013 at 10:20:58AM -0500, Jon Hunter wrote:
> While adding device-tree support for NOR memories, it became apparent
> that there is no common way for configuring various GPMC settings for
> devices that interface to the GPMC. These settings include bus-width,
> synchronous/asynchronous mode, burst settings, wait monitoring etc.
> Therefore, to simplify the GPMC code and add device-tree support for
> NOR, it was first necessary to consolidate how these settings are
> programmed.
> 
> Series based upon Mark Jackson's patch [1] and Ezequiel Garcia GPMC
> clean-up series [2]. Entire series available here [3].
> 
> V3 changes:
> - Rebased on RMK's IS_ERR_VALUE() patch and removed usage of
>   IS_ERR_VALUE() from series.
> - Fixed BUG in NAND code introduced in V2 by making gpmc_settings
>   structure a local variable (I forgot to initialise structure to zero).
> - Added fix from Javier to correct return value from gpmc_probe_nor().
> 
> V2 changes:
> - Made gpmc_settings structure local in gpmc_nand_init().
> - Use resource_size() API in probe_nor().
> - Add kernel-doc for gpmc_cs_program_settings() function.
> - Use of_platform_device_create() to register NOR devices in probe_nor().
> - Add support for GPMC address-address-data multiplexing which required
>   changing GPMC DT property "gpmc,mux-add-data" to store a 32-bit value
>   and changing mux_add_data member of gpmc_settings to be a 32-bit type
>   instead of bool.
> - Add detection for incorrect GPMC chip-select base addresses.
> - Cleaned-up code in gpmc_mem_init() and changed gpmc_mem_init() so that
>   it would not return an error when the GPMC driver is being probed.
> 
> V1 changes:
> - Clean-up/simplification of ONENAND initialisation code.
> - Add a new GPMC structure to unify storage of various GPMC settings
>   (that are non-timing related) for client devices and add a new
>   function to program these settings in a common way.
> - Migrate initialisation code for existing flash, usb and networking
>   devices to use the new structure and function for GPMC settings.
> - Add device-tree support for NOR flash memories.
> - Add additional GPMC timing parameters to GPMC device-tree binding.
> - Update GPMC NAND and ONENAND device-tree support to retrieve GPMC
>   settings from device-tree.
> 
> Testing includes:
> - Boot testing on OMAP2420 H4, OMAP3430 SDP and OMAP4430 SDP with
>   and without device-tree present.
> - OMAP2420 H4 board has NOR flash and OMAP3430 SDP has NOR, NAND
>   and ONENAND flash. So verified that flash is detected on boot
>   as expected. Note additional patches [4] are required for OMAP2420
>   H4 and OMAP3430 SDP dts files in order to enable flash memory
>   support.
> - All of the above boards use GPMC for interfacing to a networking
>   chip and so verified that networking is working wit this series.
>   However, please note that networking is not currently supported
>   on these boards when booting with DT and so networking is only
>   tested without DT.
> 
> [1] http://permalink.gmane.org/gmane.linux.ports.arm.omap/94765
> [2] http://comments.gmane.org/gmane.linux.ports.arm.omap/93784
> [3] https://github.com/jonhunter/linux/tree/omap-gpmc-for-v3.10
> [4] https://github.com/jonhunter/linux/tree/omap-dt-for-v3.10
> 
> Javier Martinez Canillas (1):
>   ARM: OMAP2+: return -ENODEV if GPMC child device creation fails
> 
> Jon Hunter (17):
>   ARM: OMAP2+: Simplify code configuring ONENAND devices
>   ARM: OMAP2+: Add variable to store number of GPMC waitpins
>   ARM: OMAP2+: Add structure for storing GPMC settings
>   ARM: OMAP2+: Add function for configuring GPMC settings
>   ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()
>   ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()
>   ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
>   ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
>   ARM: OMAP2+: Don't configure of chip-select options in
>     gpmc_cs_configure()
>   ARM: OMAP2+: Add function to read GPMC settings from device-tree
>   ARM: OMAP2+: Add device-tree support for NOR flash
>   ARM: OMAP2+: Add additional GPMC timing parameters
>   ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT
>   ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
>   ARM: OMAP2+: Detect incorrectly aligned GPMC base address
>   ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable
>   ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails
> 
>  Documentation/devicetree/bindings/bus/ti-gpmc.txt  |   48 +-
>  Documentation/devicetree/bindings/mtd/gpmc-nor.txt |   98 ++++
>  .../devicetree/bindings/mtd/gpmc-onenand.txt       |    3 +
>  arch/arm/mach-omap2/gpmc-nand.c                    |   39 +-
>  arch/arm/mach-omap2/gpmc-onenand.c                 |  110 ++--
>  arch/arm/mach-omap2/gpmc-smc91x.c                  |   30 +-
>  arch/arm/mach-omap2/gpmc.c                         |  524 +++++++++++++++-----
>  arch/arm/mach-omap2/gpmc.h                         |   37 +-
>  arch/arm/mach-omap2/usb-tusb6010.c                 |   62 ++-
>  9 files changed, 691 insertions(+), 260 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/gpmc-nor.txt
> 
> -- 
> 1.7.10.4
> 

Looks really good!

FWIW, On my OMAP3630 (IGEPv2) board, both DT and non-DT
booted and read the OneNAND device.

Tested-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>

Thanks,
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com