Getting kernel uImage build issue on omap2+

[Anil Kumar]

Hi Javier,

On Sat, Mar 16, 2013 at 2:53 PM, Javier Martinez Canillas
<javier at dowhile0.org> wrote:
> On Sat, Mar 16, 2013 at 5:44 AM, Anil Kumar <anilk4.v at gmail.com> wrote:
>> Hi,
>>
>> I am getting kernel uImage build issue on omap2+ log[1]
>>
>> Taken kernel branch "for_3.10/dts" from
>> https://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
>>
>> Taking reference from
>> https://kernel.googlesource.com/pub/scm/linux/kernel/git/tmlind/linux-omap/+/omap-for-v3.9/multiplatform-enable-signed-v2
>>
>> Am I missing some thing ?
>>
>> [1]
>> anil at anil-laptop:~/Anil/omap3/bcousson$  mkimage -A arm -O linux -T
>> kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d
>> zImage-omap2plus uImage-omap2plus
>> mkimage: Can't open zImage-omap2plus: No such file or directory
>> anil at anil-laptop:~/Anil/omap3/bcousson$
>>
>> Thanks,
>> Anil
>>
>
> Hi Anil,
>
> It seems that Tony's email assumed that you generated a bunch of
> zImages for different platforms and then naming them zImage-$platform.
>
> e.g:
>
> $ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig
> $ make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- zImage modules
> zImage-omap2plus
> $ cp cp arch/arm/boot/zImage zImage-omap2plus
>
> and then you can use the command in [1]:
>
> $  mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e
> 0x80008000 -n "Linux" -d zImage-omap2plus uImage-omap2plus
>
> anyways, the problem is that zImage-omap2plus does not exist and you
> have to use the zImage generated by "make zImage". What I usually do
> is just:
>
> $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e
> 0x80008000 -n "Linux" -d arch/arm/boot/zImage uImage-omap2plus
>
> and then copy uImage-omap2plus as uImage on either my board MMC/SD or
> Flash memory.

Thanks, It solved the issue
Anil