[PATCH 4/4 v2] mv643xx_eth: convert to use the Marvell Orion MDIO driver

[Florian Fainelli]

Le 03/14/13 19:08, Florian Fainelli a écrit :
> This patch converts the Marvell MV643XX ethernet driver to use the
> Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms
> registering the Marvell MV643XX ethernet driver are also updated to
> register a Marvell Orion MDIO driver. This driver voluntarily overlaps
> with the Marvell Ethernet shared registers because it will use a subset
> of this shared register (shared_base + 0x4 - shared_base + 0x84). The
> Ethernet driver is also updated to look up for a PHY device using the
> Orion MDIO bus driver.

Thanks to the help of Andrew Lunn, there is at least two known issues 
with this patch version:

- we need to move up the mvmdio line in 
drivers/net/ethernet/marvell/Makefile to make sure that configs having 
both mvmdio and mv643xx_eth built-in get the probing order right
- the bus name used by mv643xx_eth is not the right now (orion-mdio.0 vs 
expected orion-mdio) so the PHY device will not be found during 
phy_connect()

I will fix these two issues in the next version of the patchset.
--
Florian