GPIO polarity in bindings for Freescale MXS

[Hector Palacios]

Hello,

Maybe I'm missing something but the MXS processors (at least i.MX23 and i.MX28) cannot 
set the polarity of the GPIOs, so shouldn't the #gpio-cells be 1?

(From Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt):

- #gpio-cells : Should be two.  The first cell is the pin number and
   the second cell is used to specify the gpio polarity:
       0 = active high
       1 = active low

Regards,
-- 
Héctor Palacios