[PATCH v4] hwmon: ntc: Add DT with IIO support to NTC thermistor driver

Guenter Roeck linux at roeck-us.net
Wed Mar 13 15:52:26 EST 2013


On Wed, Mar 13, 2013 at 09:38:20AM +0530, Naveen Krishna Chatradhi wrote:
> This patch adds DT support to NTC driver to parse the
> platform data.
> 
> Also adds the support to work as an iio device.
> 
> During the probe ntc driver gets the respective channels of ADC
> and uses iio_raw_read calls to get the ADC converted value.
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen at samsung.com>

Unfortunately there is still something we'll need to sort out:

fs/sysfs/Kconfig:1:     symbol SYSFS is selected by AT91_ADC
drivers/iio/adc/Kconfig:85:     symbol AT91_ADC depends on IIO
drivers/iio/Kconfig:5:  symbol IIO is selected by SENSORS_NTC_THERMISTOR
drivers/hwmon/Kconfig:900:      symbol SENSORS_NTC_THERMISTOR depends on HWMON
drivers/hwmon/Kconfig:5:        symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:477:       symbol EEEPC_LAPTOP depends on
HOTPLUG_PCI
drivers/pci/hotplug/Kconfig:5:  symbol HOTPLUG_PCI depends on SYSFS

So we can not just select IIO. I'll see if I can find a solution.

Guenter

> ---
> Changes since v3:
> 1. Added a NULL check before iio_channel_release
> 2. Modified a return statement
> 
> Guenter Roeck, Its wonderful working with you. Thanks.
> 
>  .../devicetree/bindings/hwmon/ntc_thermistor.txt   |   29 ++++
>  drivers/hwmon/Kconfig                              |    1 +
>  drivers/hwmon/ntc_thermistor.c                     |  145 +++++++++++++++++---
>  include/linux/platform_data/ntc_thermistor.h       |    8 +-
>  4 files changed, 163 insertions(+), 20 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> new file mode 100644
> index 0000000..c6f6667
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> @@ -0,0 +1,29 @@
> +NTC Thermistor hwmon sensors
> +-------------------------------
> +
> +Requires node properties:
> +- "compatible" value : one of
> +	"ntc,ncp15wb473"
> +	"ntc,ncp18wb473"
> +	"ntc,ncp21wb473"
> +	"ntc,ncp03wb473"
> +	"ntc,ncp15wl333"
> +- "pullup-uv"	Pull up voltage in micro volts
> +- "pullup-ohm"	Pull up resistor value in ohms
> +- "pulldown-ohm" Pull down resistor value in ohms
> +- "connected-positive" Always ON, If not specified.
> +		Status change is possible.
> +- "io-channels"	Channel node of ADC to be used for
> +		conversion.
> +
> +Read more about iio bindings at
> +	Documentation/devicetree/bindings/iio/iio-bindings.txt
> +
> +Example:
> +	ncp15wb473 at 0 {
> +		compatible = "ntc,ncp15wb473";
> +		pullup-uv = <1800000>;
> +		pullup-ohm = <47000>;
> +		pulldown-ohm = <0>;
> +		io-channels = <&adc 3>;
> +	};
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 89ac1cb..cc47c12 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -879,6 +879,7 @@ config SENSORS_MCP3021
>  
>  config SENSORS_NTC_THERMISTOR
>  	tristate "NTC thermistor support"
> +	select IIO if OF
>  	help
>  	  This driver supports NTC thermistors sensor reading and its
>  	  interpretation. The driver can also monitor the temperature and
> diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
> index b5f63f9..a6997a1 100644
> --- a/drivers/hwmon/ntc_thermistor.c
> +++ b/drivers/hwmon/ntc_thermistor.c
> @@ -26,9 +26,16 @@
>  #include <linux/math64.h>
>  #include <linux/platform_device.h>
>  #include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include <linux/platform_data/ntc_thermistor.h>
>  
> +#include <linux/iio/iio.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/driver.h>
> +#include <linux/iio/consumer.h>
> +
>  #include <linux/hwmon.h>
>  #include <linux/hwmon-sysfs.h>
>  
> @@ -37,6 +44,15 @@ struct ntc_compensation {
>  	unsigned int	ohm;
>  };
>  
> +static const struct platform_device_id ntc_thermistor_id[] = {
> +	{ "ncp15wb473", TYPE_NCPXXWB473 },
> +	{ "ncp18wb473", TYPE_NCPXXWB473 },
> +	{ "ncp21wb473", TYPE_NCPXXWB473 },
> +	{ "ncp03wb473", TYPE_NCPXXWB473 },
> +	{ "ncp15wl333", TYPE_NCPXXWL333 },
> +	{ },
> +};
> +
>  /*
>   * A compensation table should be sorted by the values of .ohm
>   * in descending order.
> @@ -125,6 +141,92 @@ struct ntc_data {
>  	char name[PLATFORM_NAME_SIZE];
>  };
>  
> +#ifdef CONFIG_OF
> +static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
> +{
> +	struct iio_channel *channel = pdata->chan;
> +	unsigned int result;
> +	int val, ret;
> +
> +	ret = iio_read_channel_raw(channel, &val);
> +	if (ret < 0) {
> +		pr_err("read channel() error: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* unit: mV */
> +	result = pdata->pullup_uV * val;
> +	result >>= 12;
> +
> +	return result;
> +}
> +
> +static const struct of_device_id ntc_match[] = {
> +	{ .compatible = "ntc,ncp15wb473",
> +		.data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> +	{ .compatible = "ntc,ncp18wb473",
> +		.data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> +	{ .compatible = "ntc,ncp21wb473",
> +		.data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> +	{ .compatible = "ntc,ncp03wb473",
> +		.data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> +	{ .compatible = "ntc,ncp15wl333",
> +		.data = &ntc_thermistor_id[TYPE_NCPXXWL333] },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ntc_match);
> +
> +static struct ntc_thermistor_platform_data *
> +ntc_thermistor_parse_dt(struct platform_device *pdev)
> +{
> +	struct iio_channel *chan;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct ntc_thermistor_platform_data *pdata;
> +
> +	if (!np)
> +		return NULL;
> +
> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return ERR_PTR(-ENOMEM);
> +
> +	chan = iio_channel_get(&pdev->dev, NULL);
> +	if (IS_ERR(chan))
> +		return ERR_PTR(PTR_ERR(chan));
> +
> +	if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uV))
> +		return ERR_PTR(-ENODEV);
> +	if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
> +		return ERR_PTR(-ENODEV);
> +	if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm))
> +		return ERR_PTR(-ENODEV);
> +
> +	if (of_find_property(np, "connected-positive", NULL))
> +		pdata->connect = NTC_CONNECTED_POSITIVE;
> +	else /* status change should be possible if not always on. */
> +		pdata->connect = NTC_CONNECTED_GROUND;
> +
> +	pdata->chan = chan;
> +	pdata->read_uV = ntc_adc_iio_read;
> +
> +	return pdata;
> +}
> +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
> +{
> +	if (pdata->chan)
> +		iio_channel_release(pdata->chan);
> +}
> +#else
> +static struct ntc_thermistor_platform_data *
> +ntc_thermistor_parse_dt(struct platform_device *pdev)
> +{
> +	return NULL;
> +}
> +
> +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
> +{ }
> +#endif
> +
>  static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
>  {
>  	if (divisor == 0 && dividend == 0)
> @@ -259,7 +361,7 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data)
>  		return data->pdata->read_ohm();
>  
>  	if (data->pdata->read_uV) {
> -		read_uV = data->pdata->read_uV();
> +		read_uV = data->pdata->read_uV(data->pdata);
>  		if (read_uV < 0)
>  			return read_uV;
>  		return get_ohm_of_thermistor(data, read_uV);
> @@ -311,9 +413,18 @@ static const struct attribute_group ntc_attr_group = {
>  
>  static int ntc_thermistor_probe(struct platform_device *pdev)
>  {
> +	const struct of_device_id *of_id =
> +			of_match_device(of_match_ptr(ntc_match), &pdev->dev);
> +	const struct platform_device_id *pdev_id;
> +	struct ntc_thermistor_platform_data *pdata;
>  	struct ntc_data *data;
> -	struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
> -	int ret = 0;
> +	int ret;
> +
> +	pdata = ntc_thermistor_parse_dt(pdev);
> +	if (IS_ERR(pdata))
> +		return PTR_ERR(pdata);
> +	else if (pdata == NULL)
> +		pdata = pdev->dev.platform_data;
>  
>  	if (!pdata) {
>  		dev_err(&pdev->dev, "No platform init data supplied.\n");
> @@ -349,11 +460,13 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
>  	if (!data)
>  		return -ENOMEM;
>  
> +	pdev_id = of_id ? of_id->data : platform_get_device_id(pdev);
> +
>  	data->dev = &pdev->dev;
>  	data->pdata = pdata;
> -	strlcpy(data->name, pdev->id_entry->name, sizeof(data->name));
> +	strlcpy(data->name, pdev_id->name, sizeof(data->name));
>  
> -	switch (pdev->id_entry->driver_data) {
> +	switch (pdev_id->driver_data) {
>  	case TYPE_NCPXXWB473:
>  		data->comp = ncpXXwb473;
>  		data->n_comp = ARRAY_SIZE(ncpXXwb473);
> @@ -364,8 +477,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
>  		break;
>  	default:
>  		dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
> -				pdev->id_entry->driver_data,
> -				pdev->id_entry->name);
> +				pdev_id->driver_data, pdev_id->name);
>  		return -EINVAL;
>  	}
>  
> @@ -384,39 +496,34 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
>  		goto err_after_sysfs;
>  	}
>  
> -	dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
> -			pdev->name, pdev->id, pdev->id_entry->name,
> -			pdev->id_entry->driver_data);
> +	dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n",
> +								pdev->name);
> +
>  	return 0;
>  err_after_sysfs:
>  	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
> +	ntc_iio_channel_release(pdata);
>  	return ret;
>  }
>  
>  static int ntc_thermistor_remove(struct platform_device *pdev)
>  {
>  	struct ntc_data *data = platform_get_drvdata(pdev);
> +	struct ntc_thermistor_platform_data *pdata = data->pdata;
>  
>  	hwmon_device_unregister(data->hwmon_dev);
>  	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
> +	ntc_iio_channel_release(pdata);
>  	platform_set_drvdata(pdev, NULL);
>  
>  	return 0;
>  }
>  
> -static const struct platform_device_id ntc_thermistor_id[] = {
> -	{ "ncp15wb473", TYPE_NCPXXWB473 },
> -	{ "ncp18wb473", TYPE_NCPXXWB473 },
> -	{ "ncp21wb473", TYPE_NCPXXWB473 },
> -	{ "ncp03wb473", TYPE_NCPXXWB473 },
> -	{ "ncp15wl333", TYPE_NCPXXWL333 },
> -	{ },
> -};
> -
>  static struct platform_driver ntc_thermistor_driver = {
>  	.driver = {
>  		.name = "ntc-thermistor",
>  		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(ntc_match),
>  	},
>  	.probe = ntc_thermistor_probe,
>  	.remove = ntc_thermistor_remove,
> diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
> index 88734e8..fa95f9c 100644
> --- a/include/linux/platform_data/ntc_thermistor.h
> +++ b/include/linux/platform_data/ntc_thermistor.h
> @@ -21,6 +21,8 @@
>  #ifndef _LINUX_NTC_H
>  #define _LINUX_NTC_H
>  
> +struct iio_channel;
> +
>  enum ntc_thermistor_type {
>  	TYPE_NCPXXWB473,
>  	TYPE_NCPXXWL333,
> @@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data {
>  	 * described at Documentation/hwmon/ntc_thermistor
>  	 *
>  	 * pullup/down_ohm: 0 for infinite / not-connected
> +	 *
> +	 * chan: iio_channel pointer to communicate with the ADC which the
> +	 * thermistor is using for conversion of the analog values.
>  	 */
> -	int (*read_uV)(void);
> +	int (*read_uV)(struct ntc_thermistor_platform_data *);
>  	unsigned int pullup_uV;
>  
>  	unsigned int pullup_ohm;
>  	unsigned int pulldown_ohm;
>  	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
> +	struct iio_channel *chan;
>  
>  	int (*read_ohm)(void);
>  };
> -- 
> 1.7.9.5
> 
> 


More information about the devicetree-discuss mailing list