[PATCH 15/24] ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes

[Roger Quadros]

Add platform device for 'nop-usb-xceiv'. This will be used as a
PHY for HS USB Port 2, so provide binding information for it.

Model RESET for HS USB Port 2 as GPIO fixed regulator and link
it to the 'nop-usb-xceiv' PHY.

Signed-off-by: Roger Quadros <rogerq at ti.com>
Acked-by: Felipe Balbi <balbi at ti.com>
---
 arch/arm/mach-omap2/board-omap3stalker.c |   52 ++++++++++++++++++++++++++----
 1 files changed, 45 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 95c10b3..e38c0bd 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -26,6 +26,7 @@
 
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
+#include <linux/usb/phy.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 #include <linux/input/matrix_keypad.h>
@@ -358,19 +359,52 @@ static int __init omap3_stalker_i2c_init(void)
 
 #define OMAP3_STALKER_TS_GPIO	175
 
+/* PHY device on HS USB Port 2 i.e. nop_usb_xceiv.2 */
+static struct platform_device hsusb2_phy_device = {
+	.name = "nop_usb_xceiv",
+	.id = 2,
+};
+
+/* Regulator for HS USB Port 2 PHY reset */
+static struct regulator_consumer_supply hsusb2_reset_supplies[] = {
+	/* Link PHY device to reset supply so it gets used in the PHY driver */
+	REGULATOR_SUPPLY("reset", "nop_usb_xceiv.2"),
+};
+
+static struct regulator_init_data hsusb2_reset_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = hsusb2_reset_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(hsusb2_reset_supplies),
+};
+
+static struct fixed_voltage_config hsusb2_reset_config = {
+	.supply_name = "hsusb2_reset",
+	.microvolts = 3300000,
+	.gpio = 21,
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,
+	.enabled_at_boot = 0,   /* keep in RESET */
+	.init_data = &hsusb2_reset_data,
+};
+
+static struct platform_device hsusb2_reset_device = {
+	.name = "reg-fixed-voltage",
+	.id = PLATFORM_DEVID_AUTO,
+	.dev = {
+		.platform_data = &hsusb2_reset_config,
+	},
+};
+
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
+	&hsusb2_phy_device,
+	&hsusb2_reset_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = 21,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -407,6 +441,10 @@ static void __init omap3_stalker_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
+
+	/* PHY on HSUSB Port 2 i.e. index 1 */
+	usb_bind_phy("ehci-omap.0", 1, "nop_usb_xceiv.2");
+
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
 
-- 
1.7.4.1