[PATCH 6/8] usb: phy: nop: use new PHY API to register PHY

[Roger Quadros]

We would need to support multiple PHYs of the same type
so use the new PHY API usb_add_phy_dev() to register the PHY.

Signed-off-by: Roger Quadros <rogerq at ti.com>
Acked-by: Felipe Balbi <balbi at ti.com>
---
 drivers/usb/otg/nop-usb-xceiv.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 6efc9b7..fe7a460 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -198,12 +198,13 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	nop->phy.init		= nop_init;
 	nop->phy.shutdown	= nop_shutdown;
 	nop->phy.state		= OTG_STATE_UNDEFINED;
+	nop->phy.type		= type;
 
 	nop->phy.otg->phy		= &nop->phy;
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
 
-	err = usb_add_phy(&nop->phy, type);
+	err = usb_add_phy_dev(&nop->phy);
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
 			err);
-- 
1.7.4.1