[PATCH v2 1/5] documentation: dt: bindings: cpsw: cleanup documentation

[Mugunthan V N]

Move all the slave note properties to separate section to reduce the
confusion between slave note properties and cpsw node properties

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index ecfdf75..8e49c42 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -18,13 +18,18 @@ Required properties:
 - cpts_active_slave	: Specifies the slave to use for time stamping
 - cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
-- phy_id		: Specifies slave phy id
-- mac-address		: Specifies slave MAC address
 
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
 - no_bd_ram		: Must be 0 or 1
 - dual_emac		: Specifies Switch to act as Dual EMAC
+
+Slave Properties:
+Required properties:
+- phy_id		: Specifies slave phy id
+- mac-address		: Specifies slave MAC address
+
+Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
-- 
1.7.9.5