[PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board

Jon Hunter jon-hunter at ti.com
Tue Mar 12 04:53:32 EST 2013


On 03/08/2013 08:25 PM, Anil Kumar wrote:
> Hi Jon,
> 
> On Fri, Mar 8, 2013 at 10:57 PM, Jon Hunter <jon-hunter at ti.com> wrote:
>> Adds basic device-tree support for OMAP3430 SDP board which has 256MB
>> of RAM and uses the TWL4030 power management IC.
> 
> I think this board support should be in separate patch series with
> related patches.

Well I wanted to keep them altogether so that I can send a pull request
to Benoit and Tony.

>>
>> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
>> ---
>>  arch/arm/boot/dts/Makefile         |    1 +
>>  arch/arm/boot/dts/omap3430-sdp.dts |   46 ++++++++++++++++++++++++++++++++++++
>>  2 files changed, 47 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 9c62558..89013ed 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>>         omap3-beagle-xm.dtb \
>>         omap3-evm.dtb \
>>         omap3-tobi.dtb \
>> +       omap3430-sdp.dtb \
>>         omap4-panda.dtb \
>>         omap4-panda-a4.dtb \
>>         omap4-panda-es.dtb \
>> diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
>> new file mode 100644
>> index 0000000..be0650d
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3430-sdp.dts
>> @@ -0,0 +1,46 @@
>> +/*
>> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +/dts-v1/;
>> +
>> +/include/ "omap3.dtsi"
>> +
>> +/ {
>> +       model = "TI OMAP3430 SDP";
>> +       compatible = "ti,omap3430-sdp", "ti,omap3";
> 
> I have not seen any related changes in "board-generic.c" for your board.
> So just wanted know, how this board is booting ?

If you look at board-generic.c you will see that "ti,omap3" will match
the OMAP3 generic machine. So you don't need to modify the board-generic.c.

>> +
>> +       memory {
>> +               device_type = "memory";
>> +               reg = <0x80000000 0x10000000>; /* 256 MB */
>> +       };
>> +};
>> +
>> +&i2c1 {
>> +       clock-frequency = <2600000>;
>> +
>> +       twl: twl at 48 {
>> +               reg = <0x48>;
>> +               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
>> +               interrupt-parent = <&intc>;
>> +       };
>> +};
>> +
>> +/include/ "twl4030.dtsi"
>> +
>> +&mmc1 {
>> +       vmmc-supply = <&vmmc1>;
>> +       vmmc_aux-supply = <&vsim>;
>> +       bus-width = <8>;
>> +};
>> +
>> +&mmc2 {
>> +       status = "disabled";
>> +};
>> +
>> +&mmc3 {
>> +       status = "disabled";
>> +};
> 
> I think you should disable modules those are not currently used
> as they are enabled by default in omap3.dtsi.
> 
> exp:-
> 
> &mcbsp2 {
>         status = "disabled";
> };

Well may be we could do that in a follow-up patch. If you look at other
omap3 boards we have not gone through and disabled all unused modules
either. So although I agree, right now I just want to get minimal
support added.

Jon


More information about the devicetree-discuss mailing list