[PATCH 10/10] ASoC: imx-ssi: Add imx27 and pca100 DT support
Markus Pargmann
mpa at pengutronix.de
Mon Mar 11 05:33:11 EST 2013
Add devicetree bindings for generic imx-ssi support and specifically for
pca100 with two custom reset functions. At the moment those functions
are defined in mach-pca100.c. So until DT is the only method for
booting, the ac97 reset functions have to be exported in mach-pca100.c.
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
.../devicetree/bindings/sound/fsl-imx-ssi | 34 +++++++++
arch/arm/mach-imx/mach-pca100.c | 7 +-
sound/soc/fsl/imx-ssi.c | 85 +++++++++++++++++++---
3 files changed, 115 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/fsl-imx-ssi
diff --git a/Documentation/devicetree/bindings/sound/fsl-imx-ssi b/Documentation/devicetree/bindings/sound/fsl-imx-ssi
new file mode 100644
index 0000000..853afeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl-imx-ssi
@@ -0,0 +1,34 @@
+Freescale imx ssi driver
+
+Required properties:
+- compatible : "fsl,imx27-ssi" or "phytec,imx27-pca100-ssi"
+- reg : Should contain registers location and length
+- interrupts : Should be the ssi interrupt
+- clocks : Define at least one clock to be used.
+
+Optional properties:
+- dmas : DMA client request phandle list with arguements as defined by the DMA
+ controller used. See generic DMA devicetree bindings for more information.
+- dma-names : Names of the defined DMA client requests. "rx0" and "tx0" have to
+ be defined.
+- imx-ssi-ac97 : Use AC97
+- imx-ssi-i2s-slave : Use I2S slave
+- imx-ssi-net
+- imx-ssi-syn
+
+
+Example:
+ssi1: ssi at 10010000 {
+ compatible = "fsl,imx27-ssi";
+ reg = <0x10010000 0x1000>;
+ interrupts = <14>;
+ dmas = <&dma 8
+ &dma 9
+ &dma 10
+ &dma 11>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ clocks = <&clks 25>;
+ clock-names = "ipg";
+ imx-ssi-ac97;
+ status = "disabled";
+};
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index b8b15bb..0d54921 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
@@ -208,7 +209,7 @@ static const struct spi_imx_master pca100_spi0_data __initconst = {
.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
};
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
@@ -217,8 +218,9 @@ static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_warm_reset);
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
@@ -232,6 +234,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_cold_reset);
static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 96e24a3..58de760 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -53,6 +54,46 @@
#define SSI_SACNT_DEFAULT (SSI_SACNT_AC97EN | SSI_SACNT_FV)
+#ifdef CONFIG_MACH_PCA100
+extern void pca100_ac97_cold_reset(struct snd_ac97 *ac97);
+extern void pca100_ac97_warm_reset(struct snd_ac97 *ac97);
+#else
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { }
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { }
+#endif
+
+
+enum imx_ssi_type {
+ IMX27_SSI = 0,
+ IMX27_PCA100_SSI,
+};
+
+static const struct imx_ssi_platform_data imx_ssi_devtype[] = {
+ {
+ .ac97_reset = NULL,
+ .ac97_warm_reset = NULL,
+ },
+ {
+ .ac97_reset = pca100_ac97_cold_reset,
+ .ac97_warm_reset = pca100_ac97_warm_reset,
+ }, {
+ /* sentinel */
+ }
+};
+
+static const struct of_device_id imx_ssi_of_dev_id[] = {
+ {
+ .compatible = "fsl,imx27-ssi",
+ .data = &imx_ssi_devtype[IMX27_SSI],
+ }, {
+ .compatible = "phytec,imx27-pca100-ssi",
+ .data = &imx_ssi_devtype[IMX27_PCA100_SSI],
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx_ssi_of_dev_id);
+
/*
* SSI Network Mode or TDM slots configuration.
* Should only be called when port is inactive (i.e. SSIEN = 0).
@@ -528,9 +569,12 @@ static int imx_ssi_probe(struct platform_device *pdev)
{
struct resource *res;
struct imx_ssi *ssi;
- struct imx_ssi_platform_data *pdata = pdev->dev.platform_data;
+ const struct imx_ssi_platform_data *pdata = pdev->dev.platform_data;
int ret = 0;
struct snd_soc_dai_driver *dai;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(imx_ssi_of_dev_id, &pdev->dev);
ssi = devm_kzalloc(&pdev->dev, sizeof(*ssi), GFP_KERNEL);
if (!ssi)
@@ -538,10 +582,25 @@ static int imx_ssi_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, ssi);
if (pdata) {
- ssi->ac97_reset = pdata->ac97_reset;
- ssi->ac97_warm_reset = pdata->ac97_warm_reset;
ssi->flags = pdata->flags;
+ } else {
+ pdata = of_id->data;
+ ssi->flags = 0;
+
+ if (of_property_read_bool(pdev->dev.of_node, "dmas"))
+ ssi->flags |= IMX_SSI_DMA;
+ if (of_property_read_bool(pdev->dev.of_node, "imx-ssi-ac97"))
+ ssi->flags |= IMX_SSI_USE_AC97;
+ if (of_property_read_bool(pdev->dev.of_node, "imx-ssi-net"))
+ ssi->flags |= IMX_SSI_NET;
+ if (of_property_read_bool(pdev->dev.of_node, "imx-ssi-syn"))
+ ssi->flags |= IMX_SSI_SYN;
+ if (of_property_read_bool(pdev->dev.of_node,
+ "imx-ssi-i2s-slave"))
+ ssi->flags |= IMX_SSI_USE_I2S_SLAVE;
}
+ ssi->ac97_reset = pdata->ac97_reset;
+ ssi->ac97_warm_reset = pdata->ac97_warm_reset;
ssi->irq = platform_get_irq(pdev, 0);
@@ -586,13 +645,20 @@ static int imx_ssi_probe(struct platform_device *pdev)
ssi->dma_params_tx.burstsize = 6;
ssi->dma_params_rx.burstsize = 4;
- res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx0");
- if (res)
- ssi->dma_params_tx.dma = res->start;
+ if (pdev->dev.platform_data) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx0");
+ if (res)
+ ssi->dma_params_tx.dma = res->start;
- res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx0");
- if (res)
- ssi->dma_params_rx.dma = res->start;
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx0");
+ if (res)
+ ssi->dma_params_rx.dma = res->start;
+ } else {
+ ssi->dma_params_rx.dma_client_node = pdev->dev.of_node;
+ ssi->dma_params_rx.dma_req_name = "rx0";
+ ssi->dma_params_tx.dma_client_node = pdev->dev.of_node;
+ ssi->dma_params_tx.dma_req_name = "tx0";
+ }
platform_set_drvdata(pdev, ssi);
@@ -673,6 +739,7 @@ static struct platform_driver imx_ssi_driver = {
.driver = {
.name = "imx-ssi",
.owner = THIS_MODULE,
+ .of_match_table = imx_ssi_of_dev_id,
},
};
--
1.8.1.5
More information about the devicetree-discuss
mailing list