[PATCH 1/1] gpio: omap: dts: Move interrupt-controller from #interrupt-cells description

[Javier Martinez Canillas]

On Mon, Mar 4, 2013 at 8:23 PM, Jon Hunter <jon-hunter at ti.com> wrote:
>
> On 03/04/2013 12:35 PM, Javier Martinez Canillas wrote:
>> The binding documentation for the OMAP GPIO controller has the description
>> for the "#interrupt-cells" property after the "interrupt-controller"
>> definition. This is confusing so is better to move "interrupt-controller"
>> after the "#interrupt-cells" description.
>>
>> Reported-by: Stephen Warren <swarren at nvidia.com>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
>> ---
>>  .../devicetree/bindings/gpio/gpio-omap.txt         |    2 +-
>>  1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
>> index bff51a2..8b9914c 100644
>> --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
>> @@ -10,7 +10,6 @@ Required properties:
>>    - second cell is used to specify optional parameters (unused)
>>  - gpio-controller : Marks the device node as a GPIO controller.
>>  - #interrupt-cells : Should be 2.
>> -- interrupt-controller: Mark the device node as an interrupt controller
>>    The first cell is the GPIO number.
>>    The second cell is used to specify flags:
>>      bits[3:0] trigger type and level flags:
>> @@ -18,6 +17,7 @@ Required properties:
>>        2 = high-to-low edge triggered.
>>        4 = active high level-sensitive.
>>        8 = active low level-sensitive.
>> +- interrupt-controller: Mark the device node as an interrupt controller.
>>
>>  OMAP specific properties:
>>  - ti,hwmods: Name of the hwmod associated to the GPIO:
>>
>
> Thanks. Do you mind putting "interrupt-controller" before
> "#interrupt-cells" as I see this is how they have it in
> Documenation/devicetree/bindings/interrupt-controller/interrupts.txt?
> Otherwise ...
>
> Acked-by: Jon Hunter <jon-hunter at ti.com>
>
> Cheers
> Jon
> --

Hi Jon, thanks for the feedback.

I just looked at Documentation/devicetree/bindings/gpio/gpio.txt and
realized that gpio-controller and #gpio-cells should be flipped as
well.

Will send a v2 with both changes.

Best regards,
Javier