[PATCH 4/9] MXS/i.MX28: there is more than one way to clock the RTC

[Steffen Trumtrar]

From: Juergen Beisert <jbe at pengutronix.de>

Reflect the possibilities via device tree and configure the RTC correctly

Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 arch/arm/boot/dts/imx28.dtsi |    2 ++
 drivers/rtc/rtc-stmp3xxx.c   |   76 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index dcd0844..d89af79 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -818,6 +818,8 @@
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
+				clocks = <&clks 65>, <&clks 40> ;
+				clock-names = "32k", "24m";
 			};
 
 			i2c0: i2c at 80058000 {
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 7311292..fb4b823 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -21,6 +21,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
@@ -176,11 +177,55 @@ static irqreturn_t stmp3xxx_rtc_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
+/*
+ * To keep the energy consumption low, keep only
+ * the really used oscillator running when the power is down
+ */
+static void stmp3xxx_alarm_keep_oscillator(const struct stmp3xxx_rtc_data *rtc_data)
+{
+	switch (rtc_data->clk_src) {
+	case MXS_OSC_24M:
+		/* keep the 24 MHz oscillator running even in power down */
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ | /* 24 MHz / 750 */
+			STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
+		break;
+	case MXS_OSC_32K:
+		/* keep the 32 kHz oscillator running even in power down */
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ | /* 32 kHz */
+			STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
+		break;
+	case MXS_OSC_32K768:
+		/* keep the 32 kHz oscillator running even in power down */
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
+		writel(STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ | /* 32.768 kHz */
+			STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
+		break;
+	case MXS_UNKNOWN:
+	default:
+		break;
+	}
+}
+
 static int stmp3xxx_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 
+	stmp3xxx_alarm_keep_oscillator(rtc_data);
+
 	if (enabled) {
+		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE, /* to be able to sleep */
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
 		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 				STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
 				rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
@@ -248,6 +293,8 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 {
 	struct stmp3xxx_rtc_data *rtc_data;
 	struct resource *r;
+	struct clk *clk;
+	unsigned long rate;
 	int err;
 
 	rtc_data = kzalloc(sizeof *rtc_data, GFP_KERNEL);
@@ -280,6 +327,35 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, rtc_data);
 
 	mxs_reset_block(rtc_data->io);
+
+	/*
+	 * configure the RTC to provide the correct time
+	 */
+	clk = clk_get(&pdev->dev, "32k");
+	if (IS_ERR(clk)) {
+		/* just a fall back */
+		dev_warn(&pdev->dev, "RTC's input clock undefined\n");
+		rtc_data->clk_src = MXS_OSC_24M;
+	} else {
+		rate = clk_get_rate(clk);
+		if (rate == 0) {
+			/* no dedicated external crystal */
+			rtc_data->clk_src = MXS_OSC_24M;
+			dev_info(&pdev->dev, "Using 24 MHz as RTC's clock\n");
+		} else if (rate == 32000) {
+			rtc_data->clk_src = MXS_OSC_32K;
+			dev_info(&pdev->dev, "Using 32.0 kHz as RTC's clock\n");
+		} else if (rate == 32768) {
+			rtc_data->clk_src = MXS_OSC_32K768;
+			dev_info(&pdev->dev, "Using 32.768 kHz as RTC's clock\n");
+		} else
+			dev_warn(&pdev->dev,
+				"Cannot init the RTC's clock source\n");
+	}
+
+	/* basically configure the RTC's input clock */
+	stmp3xxx_alarm_keep_oscillator(rtc_data);
+
 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
-- 
1.7.10.4