[PATCH V2 1/3] phy: Add driver for Exynos DP PHY
Kishon Vijay Abraham I
kishon at ti.com
Sat Jun 29 19:00:09 EST 2013
Hi,
On Friday 28 June 2013 12:45 PM, Jingoo Han wrote:
> Add a PHY provider driver for the Samsung Exynos SoC DP PHY.
>
> Signed-off-by: Jingoo Han <jg1.han at samsung.com>
> ---
> .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++
> drivers/phy/Kconfig | 8 ++
> drivers/phy/Makefile | 3 +-
> drivers/phy/phy-exynos-dp-video.c | 122 ++++++++++++++++++++
> 4 files changed, 139 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
> create mode 100644 drivers/phy/phy-exynos-dp-video.c
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
> b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
> new file mode 100644
> index 0000000..d1771ef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
> @@ -0,0 +1,7 @@
> +Samsung EXYNOS SoC series DP PHY
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible : should be "samsung,exynos5250-dp-video-phy";
> +- reg : offset and length of the DP PHY register set;
> +- #phy-cells : from the generic phy bindings, must be 0;
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 5f85909..6d10e3b 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -11,3 +11,11 @@ menuconfig GENERIC_PHY
> devices present in the kernel. This layer will have the generic
> API by which phy drivers can create PHY using the phy framework and
> phy users can obtain reference to the PHY.
> +
> +if GENERIC_PHY
> +
> +config PHY_EXYNOS_DP_VIDEO
> + tristate "EXYNOS SoC series DP PHY driver"
> + help
> + Support for DP PHY found on Samsung EXYNOS SoCs.
> +endif
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 9e9560f..d8d861c 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -2,4 +2,5 @@
> # Makefile for the phy drivers.
> #
>
> -obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> new file mode 100644
> index 0000000..9a3d6f1
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -0,0 +1,122 @@
> +/*
> + * Samsung EXYNOS SoC series DP PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Jingoo Han <jg1.han at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +/* DPTX_PHY_CONTROL register */
> +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0)
> +
> +struct exynos_dp_video_phy {
> + spinlock_t slock;
I think spinlock is not needed at all since the PHY ops is already protected
by a mutex.
> + struct phy *phys;
_phys_ no longer need to part of this structure.
> + void __iomem *regs;
> +};
Thanks
Kishon
More information about the devicetree-discuss
mailing list