[PATCH v9 1/8] drivers: phy: add generic PHY framework

Jingoo Han jg1.han at samsung.com
Fri Jun 28 13:27:15 EST 2013


On Wed, 26 Jun 2013 17:17:29 +0530, Kishon Vijay Abraham Iwrote:
> The PHY framework provides a set of APIs for the PHY drivers to
> create/destroy a PHY and APIs for the PHY users to obtain a reference to the
> PHY with or without using phandle. For dt-boot, the PHY drivers should
> also register *PHY provider* with the framework.
>
> PHY drivers should create the PHY by passing id and ops like init, exit,
> power_on and power_off. This framework is also pm runtime enabled.
>
> The documentation for the generic PHY framework is added in
> Documentation/phy.txt and the documentation for dt binding can be found at
> Documentation/devicetree/bindings/phy/phy-bindings.txt
>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> Tested-by: Sylwester Nawrocki <s.nawrocki at samsung.com>

Tested-by: Jingoo Han <jg1.han at samsung.com>

It looks great to me!

I tested this General PHY framework with Exynos5250 eDP.
It works properly.
I will share the patch 'Generic PHY driver for the Exynos SoC DP PHY', soon.
Thanks.

Best regards,
Jingoo Han

> ---
>  .../devicetree/bindings/phy/phy-bindings.txt       |   66 +++
>  Documentation/phy.txt                              |  129 +++++
>  MAINTAINERS                                        |    7 +
>  drivers/Kconfig                                    |    2 +
>  drivers/Makefile                                   |    2 +
>  drivers/phy/Kconfig                                |   13 +
>  drivers/phy/Makefile                               |    5 +
>  drivers/phy/phy-core.c                             |  544 ++++++++++++++++++++
>  include/linux/phy/phy.h                            |  344 +++++++++++++
>  9 files changed, 1112 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-bindings.txt
>  create mode 100644 Documentation/phy.txt
>  create mode 100644 drivers/phy/Kconfig
>  create mode 100644 drivers/phy/Makefile
>  create mode 100644 drivers/phy/phy-core.c
>  create mode 100644 include/linux/phy/phy.h



More information about the devicetree-discuss mailing list