[PATCH v2 2/6] misc: sram: add ability to mark sram sections as reserved
Philipp Zabel
p.zabel at pengutronix.de
Wed Jun 26 20:09:44 EST 2013
Am Mittwoch, den 26.06.2013, 11:18 +0200 schrieb Heiko Stübner:
> Hi Philipp,
>
> Am Dienstag, 25. Juni 2013, 12:17:05 schrieb Philipp Zabel:
> > Hi Heiko,
> >
> > Am Dienstag, den 25.06.2013, 10:47 +0200 schrieb Heiko Stübner:
> > > Some SoCs need parts of their sram for special purposes. So while being
> > > part of the periphal, it should not be part of the genpool controlling
> > > the sram.
> > >
> > > Threfore add an option mmio-sram-reserved to keep arbitary portions of
> > > the sram from being part of the pool.
> > >
> > > Suggested-by: Rob Herring <robherring2 at gmail.com>
> > > Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> > > ---
> > >
> > > Documentation/devicetree/bindings/misc/sram.txt | 8 +++
> > > drivers/misc/sram.c | 86
> > > +++++++++++++++++++++-- 2 files changed, 88 insertions(+), 6
> > > deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/misc/sram.txt
> > > b/Documentation/devicetree/bindings/misc/sram.txt index 4d0a00e..eae080e
> > > 100644
> > > --- a/Documentation/devicetree/bindings/misc/sram.txt
> > > +++ b/Documentation/devicetree/bindings/misc/sram.txt
> > >
> > > @@ -8,9 +8,17 @@ Required properties:
> > > - reg : SRAM iomem address range
> > >
> > > +Optional properties:
> > > +
> > > +- mmio-sram-reserved: ordered list of reserved chunks inside the sram
> > > that + should not become part of the genalloc pool.
> > > + Format is <base size>, <base size>, ...; with base being relative to
> > > the + reg property base.
> > > +
> >
> > the keyword to reserve blocks of ram is /memreserve/ - should this
> > property name be aligned with that?
>
> The mmio-sram-reserved name was suggested by Rob Herring, who I suppose has
> some slight experience with devicetree :-) .
That did sound like a suggestion from the top of his head, though.
I just wanted to point out the similarity in function, in case it is
relevant.
> I wasn't able to find real documentation on /memreserve/ but it looks more
> like it's used to reserve generic memregions, not being node-specific.
> So reusing this might also cause confusion when the reserve-data now is
> relative to it's node reg.
True.
> > > Example:
> > >
> > > sram: sram at 5c000000 {
> > >
> > > compatible = "mmio-sram";
> > > reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> > >
> > > + mmio-sram-reserved = <0x0 0x100>; /* reserve 0x5c000000-0x5c000100 */
> > >
> > > };
> > >
> > > diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
> > > index afe66571..5fccbe3 100644
> > > --- a/drivers/misc/sram.c
> > > +++ b/drivers/misc/sram.c
> > > @@ -42,6 +42,8 @@ static int sram_probe(struct platform_device *pdev)
> > >
> > > struct sram_dev *sram;
> > > struct resource *res;
> > > unsigned long size;
> > >
> > > + const __be32 *reserved_list = NULL;
> > > + int reserved_size = 0;
> > >
> > > int ret;
> > >
> > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > >
> > > @@ -65,12 +67,89 @@ static int sram_probe(struct platform_device *pdev)
> > >
> > > if (!sram->pool)
> > >
> > > return -ENOMEM;
> > >
> > > - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
> > > - res->start, size, -1);
> > > - if (ret < 0) {
> > > - if (sram->clk)
> > > - clk_disable_unprepare(sram->clk);
> > > - return ret;
> > > + if (pdev->dev.of_node) {
> > > + reserved_list = of_get_property(pdev->dev.of_node,
> > > + "mmio-sram-reserved",
> > > + &reserved_size);
> > > + if (reserved_list) {
> > > + reserved_size /= sizeof(*reserved_list);
> > > + if (!reserved_size || reserved_size % 2) {
> > > + dev_warn(&pdev->dev, "wrong number of arguments in
> > > mmio-sram-reserved\n"); + reserved_list = NULL;
> > > + }
> > > + }
> > > + }
> > > +
> > > + if (!reserved_list) {
> > > + ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
> > > + res->start, size, -1);
> > > + if (ret < 0) {
> > > + if (sram->clk)
> > > + clk_disable_unprepare(sram->clk);
> > > + return ret;
> > > + }
> >
> > Moving the clk_prepare_enable() further down would allow to avoid the
> > clk_disable_unprepare() in every error path,
> >
> > > + } else {
> > > + unsigned int cur_start = 0;
> > > + unsigned int cur_size;
> > > + unsigned int rstart;
> > > + unsigned int rsize;
> > > + int i;
> > > +
> > > + for (i = 0; i < reserved_size; i += 2) {
> > > + /* get the next reserved block */
> > > + rstart = be32_to_cpu(*reserved_list++);
> > > + rsize = be32_to_cpu(*reserved_list++);
> > > +
> > > + /* catch unsorted list entries */
> > > + if (rstart < cur_start) {
> > > + dev_err(&pdev->dev, "unsorted reserved list (0x%x before
> current
> > > 0x%x)\n", + rstart, cur_start);
> > > + if (sram->clk)
> > > + clk_disable_unprepare(sram->clk);
> >
> > like here
> >
> > > + return -EINVAL;
> > > + }
> > > +
> > > + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
> > > + rstart, rstart + rsize);
> > > +
> > > + /* current start is in a reserved block */
> > > + if (rstart <= cur_start) {
> > > + cur_start = rstart + rsize;
> > > + continue;
> > > + }
> > > +
> > > + /*
> > > + * allocate the space between the current starting
> > > + * address and the following reserved block
> > > + */
> > > + cur_size = rstart - cur_start;
> > > +
> > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n",
> > > + cur_start, cur_start + cur_size);
> > > + ret = gen_pool_add_virt(sram->pool,
> > > + (unsigned long)virt_base + cur_start,
> > > + res->start + cur_start, cur_size, -1);
> > > + if (ret < 0) {
> > > + if (sram->clk)
> > > + clk_disable_unprepare(sram->clk);
> >
> > and here.
> >
> > > + return ret;
> > > + }
> > > +
> > > + /* next allocation after this reserved block */
> > > + cur_start = rstart + rsize;
> > > + }
> > > +
> > > + /* allocate the space after the last reserved block */
> > > + if (cur_start < size) {
> > > + cur_size = size - cur_start;
> > > +
> > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n",
> > > + cur_start, cur_start + cur_size);
> > > + ret = gen_pool_add_virt(sram->pool,
> > > + (unsigned long)virt_base + cur_start,
> > > + res->start + cur_start, cur_size, -1);
> > > + }
> > > +
> > >
> > > }
> > >
> > > platform_set_drvdata(pdev, sram);
> >
> > Also, I think you could reduce the duplication of gen_pool_add_virt()
> > function calls, somehow like this:
> >
> > unsigned int cur_start = 0;
> > unsigned int cur_size;
> > unsigned int rstart;
> > unsigned int rsize;
> > int i = 0;
> >
> > if (!reserved_list)
> > reserved_size = 0;
> >
> > for (i = 0; i < (reserved_size + 2); i += 2) {
> > if (i < reserved_size) {
> > /* get the next reserved block */
> > rstart = be32_to_cpu(*reserved_list++);
> > rsize = be32_to_cpu(*reserved_list++);
> >
> > /* catch unsorted list entries */
> > if (rstart < cur_start) {
> > dev_err(&pdev->dev,
> > "unsorted reserved list (0x%x before current 0x%x)\n",
> > rstart, cur_start);
> > return -EINVAL;
> > }
> >
> > dev_dbg(&pdev->dev,
> > "found reserved block 0x%x-0x%x\n",
> > rstart, rstart + rsize);
> > } else {
> > /* the last chunk extends to the end of the region */
> > rstart = size;
> > }
> >
> > /* current start is in a reserved block */
> > if (rstart <= cur_start) {
> > cur_start = rstart + rsize;
> > continue;
> > }
> >
> > /*
> > * allocate the space between the current starting
> > * address and the following reserved block, or the
> > * end of the region.
> > */
> > cur_size = rstart - cur_start;
> >
> > dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n",
> > cur_start, cur_start + cur_size);
> > ret = gen_pool_add_virt(sram->pool,
> > (unsigned long)virt_base + cur_start,
> > res->start + cur_start, cur_size, -1);
> > if (ret < 0)
> > return ret;
> > }
>
> yep, this looks nicer - same for moving the clk_prepare_enable to below this
> loop to unclutter the error-path.
>
> So I will incorporate this in v3.
Excellent.
thanks
Philipp
More information about the devicetree-discuss
mailing list