[PATCH v2 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

[Sylwester Nawrocki]

Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
Changes since v1:
 - enabled pull down in cam-port-{a, b}-clk-idle nodes.
---
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   40 ++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..55ff73b 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
 			samsung,pin-drv = <0>;
 		};

-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
 	};
@@ -778,16 +791,29 @@
 			samsung,pin-drv = <3>;
 		};

-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};

+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;
--
1.7.9.5