[RFC PATCH V2 8/8] ARM: dts: OMAP4-panda-es: use tps regulator as cpu0 supply
Nishanth Menon
nm at ti.com
Sat Jun 22 07:25:49 EST 2013
TPS62361 is used for cpufreq regulation. As part of this change
use labels that can be used to reference cpu0 to setup it's supply.
Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/boot/dts/omap4-panda-es.dts | 4 ++++
arch/arm/boot/dts/omap4.dtsi | 4 ++--
arch/arm/boot/dts/omap443x.dtsi | 2 +-
arch/arm/boot/dts/omap4460.dtsi | 2 +-
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 325816c..d2ce518 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -93,3 +93,7 @@
>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
+
+&cpu0 {
+ cpu0-supply = <&omap_tps62361>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3c75b23..127b974 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -24,13 +24,13 @@
};
cpus {
- cpu at 0 {
+ cpu0: cpu at 0 {
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
clocks = <&dpll_mpu>;
clock-names = "cpu";
};
- cpu at 1 {
+ cpu1: cpu at 1 {
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index e759937..91a5f70 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -12,7 +12,7 @@
/ {
cpus {
- cpu at 0 {
+ cpu0: cpu at 0 {
/* OMAP443x variants OPP50-OPPNT */
operating-points = <
/* kHz uV */
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 8320865..9827e35 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -12,7 +12,7 @@
/ {
cpus {
/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
- cpu at 0 {
+ cpu0: cpu at 0 {
operating-points = <
/* kHz uV */
350000 1025000
--
1.7.9.5
More information about the devicetree-discuss
mailing list