[PATCH 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs
Sylwester Nawrocki
s.nawrocki at samsung.com
Fri Jun 21 22:50:17 EST 2013
Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.
Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 40 ++++++++++++++++++++++++-----
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..50eaa95 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
samsung,pin-drv = <0>;
};
- cam_port_a: cam-port-a {
+ cam_port_a_io: cam-port-a-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
- "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
- "gpj1-4";
+ "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a_clk_active: cam-port-a-clk-active {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_a_clk_idle: cam-port-a-clk-idle {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
@@ -778,16 +791,29 @@
samsung,pin-drv = <3>;
};
- cam_port_b: cam-port-b {
+ cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
- "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
- "gpm2-2";
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+ cam_port_b_clk_active: cam-port-b-clk-active {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_clk_idle: cam-port-b-clk-idle {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
--
1.7.9.5
More information about the devicetree-discuss
mailing list