[RESEND,PATCHv6 1/1] Add support for GMT G762/G763 PWM fan controllers

Guenter Roeck linux at roeck-us.net
Thu Jun 20 06:53:21 EST 2013


On Wed, Jun 19, 2013 at 10:15:56PM +0200, Arnaud Ebalard wrote:
> Hi Simon,
> 
> Simon Guinot <simon.guinot at sequanux.org> writes:
> 
> > I have tested this patch on my 2Big Network v2 board.
> >
> > Sometimes I get a weird "No such device" error while reading or writing
> > the hwmon sysfs attributes. For example:
> >
> > # cat pwm1
> > cat: read error: No such device
> > # cat pwm1
> > 0
> 
This is odd, since ENODEV should not be returned as error code from i2c read
operations.

What is the i2c controller ?

Thanks,
Guenter

> Weird, I cannot reproduce that at all on my ReadyNAS Duo v2.
> 
> > Note, that if the same command is executed again (just after the faulty
> > one), then it will succeed most of the time. The errors seems to happen
> > quite randomly and not very often. I'd say one time over ten tries.
> > I suppose this error is now visible due to the enhanced error path in
> > g762_update_client. It looks like we learn something by checking the
> > return value for i2c_smbus_read_byte_data :)
> >
> > Except that, all is working as expected. This new version fixes
> > effectively open-loop driving when the set_cnt register is set to 0xff.
> >
> > Also I am planning (hopefully this Wednesday) to test your patch on my
> > 5Big Network v2 board. This last also embed a g762 controller but with a
> > three wires fan instead. Then, I should be able to test the closed-loop
> > mode behaviour.
> 
> Thanks for your tests, Simon.
> 
> Cheers,
> 
> a+ 
> 


More information about the devicetree-discuss mailing list