[PATCH 2/3] ARM: dts: Add MFC node for exynos 5420

[Sachin Kamat]

On 19 June 2013 14:22, Arun Kumar K <arun.kk at samsung.com> wrote:
> The patch adds MFC nodes for exynos 5420 and for
> smdk 5420 board.
>
> Signed-off-by: Arun Kumar K <arun.kk at samsung.com>
> ---
>  arch/arm/boot/dts/exynos5420-smdk5420.dts |    5 +++++
>  arch/arm/boot/dts/exynos5420.dtsi         |    8 ++++++++
>  2 files changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 08607df..682532c 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -30,4 +30,9 @@
>                         clock-frequency = <24000000>;
>                 };
>         };
> +
> +       codec at 11000000 {
> +               samsung,mfc-r = <0x43000000 0x800000>;
> +               samsung,mfc-l = <0x51000000 0x800000>;
> +       };
>  };
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 8474d63..cb74356 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -100,4 +100,12 @@
>                 clocks = <&clock 260>, <&clock 131>;
>                 clock-names = "uart", "clk_uart_baud0";
>         };
> +
> +       codec at 11000000 {
> +               compatible = "samsung,mfc-v7";
> +               reg = <0x11000000 0x10000>;
> +               interrupts = <0 96 0>;
> +               clocks = <&clock 401>;
> +               clock-names = "mfc";
> +       };

I think it is better if we disable the IPs in dtsi file and enbale
them in respective board files as was followed for Exynos4.


-- 
With warm regards,
Sachin