[PATCH v3 03/12] bus: mvebu-mbus: Add static window allocation to the DT binding

Arnd Bergmann arnd at arndb.de
Wed Jun 19 07:45:26 EST 2013


On Tuesday 18 June 2013, Ezequiel Garcia wrote:
> On Tue, Jun 18, 2013 at 06:14:33PM +0200, Arnd Bergmann wrote:
> > On Tuesday 18 June 2013, Ezequiel Garcia wrote:
> > > +Required properties:
> > > +
> > > +- compatible:	 Should be set to one of the following:
> > > +		 marvell,armada370-mbus
> > > +		 marvell,armadaxp-mbus
> > > +
> > > +- reg:		 Device's register space.
> > > +		 Two entries are expected, see the examples below.
> > > +		 The first one controls the devices decoding window and
> > > +		 the second one controls the SDRAM decoding window.
> > > +
> > > +- address-cells: Must be '2'. The first cell for the MBus ID encoding,
> > > +                 the second cell for the address offset within the window.
> > > +
> > > +- size-cells:    Must be '1'.
> > > +
> > > +- ranges:        Must be set up to provide a proper translation for each child.
> > > +	         See the examples below.
> > 
> > You should explain here what the policy is regarding windows set up by the
> > boot loader. Are the ranges in here required to be the ones that the boot
> > loader has preconfigured, or are they the ones that the mbus driver is supposed
> > to set up?
> > 
> 
> Actually, I might be confused but the kernel MBus driver is completely
> independent from the bootloader's -except in the internal register case,
> (because we don't touch that from where the bootloader left it).

Right, then state that clearly in the binding.

> What happens is that any decoding window that was setup by the bootloader,
> is wiped and completely new windows are allocated using the translations
> in the DT, as described by this binding.
> 
> This was the case from the start with the old MBus driver. FWIW, I think
> it's actually the best choice that can be made: it makes the kernel
> independent of the previous setting.
> 
> I know you've suggested differently in the past, but I'm not sure I
> understand what's the benefit in keeping the bootloaders configuration.

The device tree /normally/ describes things that are either wired up
in hardware or set up by the boot loader. Describing things that the
boot loader may or may not have set up and that the kernel should
set up but may ignore if it wants to is a bit fishy, but it seems
that you have decided to do it that way. You should definitely
document the fact that all ranges except the "internal-regs" are just
suggestions and cannot be relied on to be present at boot time.

A cleaner approach would be to require that all ranges here are exactly
the ones that have been configured by the boot loader, and state the
OS can either assume that they are valid or can reprogram them as
needed. That would imply that you don't actually need an mbus driver
unless you want to dynamically reassign the windows.

Please also add a property that describes the address range in which
the windows might be reassigned, i.e. everything that is not RAM.

> > > +Each child device needs at least a 'ranges' property. If the child is avaiable
> > > +(i.e. status not 'disabled'), then the MBus driver creates a decoding window
> > > +for it. For instance, in the example below the BootROM child is specified:
> > > +
> > > +	soc {
> > > +		compatible = "marvell,armada370-mbus", "simple-bus";
> > > +		reg = <0xd0020000 0x100>, <0xd0020180 0x20>;
> > > +		#address-cells = <2>;
> > > +		#size-cells = <1>;
> > > +
> > > +		ranges = < ... /* other entries */
> > > +			   0x011d0000 0 0 0xfff00000 0x100000>;
> > > +
> > > +		bootrom {
> > > +			#address-cells = <1>;
> > > +			#size-cells = <1>;
> > > +			ranges = <0 0x011d0000 0 0x100000>;
> > > +		};
> > > +
> > > +		/* other children */
> > > +		...
> > > +	};
> > 
> > Do you really want to require the child to provide a "ranges" property?
> > I think this makes it more complicated to specify devices that belong
> > into the "internal-regs" category.
> > 
> 
> No, this text is actually a left-over from the previous patchset, in
> current v3 patchset MBus children are *not* required to have any ranges.
> On the otherside, although you will need one except in the most trivial
> cases like for the BootROM.

Ok.

	Arnd


More information about the devicetree-discuss mailing list