[PATCH v3 03/12] bus: mvebu-mbus: Add static window allocation to the DT binding

[Sebastian Hesselbarth]

On 06/18/2013 08:47 PM, Jason Gunthorpe wrote:
> On Tue, Jun 18, 2013 at 08:44:30PM +0200, Sebastian Hesselbarth wrote:
>> Yeah, I also recall Thomas or Gregory mention a 32b limitation in
>> remap windows. But we don't need to waste addresses here
>>
>> And even if SIAA0000 is a concern because there may be target id>15
>> someday, we can still have IIAASS00 instead of IIAA00SS. I guess
>> LPAE will not rise above 40b quickly ;)
>
> S = 0 means 4 bit I, 8 bit A
> S = F means special
> S = 1 could mean 16 bit I, etc , etc

S & 0x8 == 0x0 means 7b target
S & 0x8 == 0x8 means 7b special ?

> Yes, we could define things as 'SIAAoooo oooooooo'
>
> But remember 'o' is the offset within the window, it is not related to
> LPAE.
>
> To need>  32 bits 'o' you need to have windows>  4G in size. The only
> thing that could possibly do that is PCI-E, and it is all special
> anyhow..
>
> The mbus top level ranges remap already supports>4G locations for
> the windows, even though current hardware cannot do that.

True. But as Arnd also mentioned, I don't think it will ever be a
problem at all. Possibly there will never be any future SoC with mbus
that will either allow >32b remap base addresses nor >4G size.

But never the less, IIAA00SS (which is used in v3 of the patches) will
limit both to 32b/4G forever.

And we already have +3 for SIAAoooo ;)

Sebastian