[PATCH v7 5/9] ARM: OMAP: USB: Add phy binding information

[Felipe Balbi]

Hi,

On Tue, Jun 18, 2013 at 03:34:36PM +0530, Kishon Vijay Abraham I wrote:
> On Tuesday 18 June 2013 03:14 PM, Felipe Balbi wrote:
> >On Thu, Jun 13, 2013 at 02:13:55PM +0530, Kishon Vijay Abraham I wrote:
> >>In order for controllers to get PHY in case of non dt boot, the phy
> >>binding information (phy device name) should be added in the platform
> >>data of the controller.
> >>
> >>Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> >
> >I would rather not pass strings around, any other way to handle this ?
> >Why do you need to pass this string ?
> 
> Our old way of binding the controller and the phy using device name
> started creating problems after the devices are created using
> PLATFORM_DEVID_AUTO. Infact non-dt boot is broken in mainline for
> OMAP3 platforms for which I have posted a RFC series
> http://www.serverphorums.com/read.php?12,708632 which also uses
> strings.
> I'm not sure of any other way to deal with this.

have you checked how other frameworks handle it ? Regulator has some
sort of binding in board-files, but I guess it passes the regulator
name?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130618/b245c2bb/attachment.sig>