[PATCH] Documentation: Add examples to samsung-pinctrl device tree bindings documentation
Leela Krishna Amudala
l.krishna at samsung.com
Mon Jun 17 20:44:55 EST 2013
This patch adds examples to samsung-pinctrl.txt documentaion file
on how to make gpio binding and gpio request
Signed-off-by: Leela Krishna Amudala <l.krishna at samsung.com>
Reviewed-by: Doug Anderson <dianders at chromium.org>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 48 +++++++++++++++++++-
1 file changed, 46 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index b2bc219..f1cf177 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -25,8 +25,18 @@ Required Properties:
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See generic
- GPIO binding documentation for description of particular cells.
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ Eg: <&gpx2 6 0>
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [flags]>
+
+ Values for gpio specifier:
+ - Pin number: is a value between 0 to 7.
+ - Flags: 0 - Active High
+ 1 - Active Low
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
@@ -274,3 +284,37 @@ Example 4: Set up the default pin state for uart controller.
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
+
+Example 5: A display port client node that supports 'default' pinctrl state
+ and gpio binding.
+
+ display-port-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x06>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ };
+
+Example 6: Request the gpio for display port controller
+
+ static int exynos_dp_probe(struct platform_device *pdev)
+ {
+ int hpd_gpio, ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *dp_node = dev->of_node;
+
+ /* ... */
+
+ hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
+
+ /* ... */
+
+ ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
+ "hpd_gpio");
+ /* ... */
+ }
--
1.7.9.5
More information about the devicetree-discuss
mailing list