[PATCH 1/7] ARM: mxc: fix gpio-ranges for VF610
Stephen Warren
swarren at wwwdotorg.org
Fri Jun 14 06:59:53 EST 2013
From: Stephen Warren <swarren at nvidia.com>
The gpio-ranges properties in vf610.dtsi were written according to an
older version of the GPIO bindings. Unfortunately, these were changed
incompatibly in commit 86853c8 "gpio: add gpio offset in gpio range
cells property". This patch adds the missing required extra cell in each
gpio-ranges property.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
This should be immediately applied to the tree which added vf610.dtsi.
---
arch/arm/boot/dts/vf610.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 659d845..e1eb7da 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -162,7 +162,7 @@
iomuxc: iomuxc at 40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
- #gpio-range-cells = <2>;
+ #gpio-range-cells = <3>;
/* functions and groups pins */
@@ -343,7 +343,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 32>;
+ gpio-ranges = <&iomuxc 0 0 32>;
};
gpio2: gpio at 4004a000 {
@@ -354,7 +354,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 32 32>;
+ gpio-ranges = <&iomuxc 0 32 32>;
};
gpio3: gpio at 4004b000 {
@@ -365,7 +365,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 64 32>;
+ gpio-ranges = <&iomuxc 0 64 32>;
};
gpio4: gpio at 4004c000 {
@@ -376,7 +376,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 96 32>;
+ gpio-ranges = <&iomuxc 0 96 32>;
};
gpio5: gpio at 4004d000 {
@@ -387,7 +387,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 128 7>;
+ gpio-ranges = <&iomuxc 0 128 7>;
};
anatop at 40050000 {
--
1.8.1.5
More information about the devicetree-discuss
mailing list