[PATCH v2 1/2] mmc: dw_mmc: Handle late vmmc regulators with EPROBE_DEFER
Tomasz Figa
tomasz.figa at gmail.com
Sat Jun 8 03:42:03 EST 2013
On Friday 07 of June 2013 10:28:29 Doug Anderson wrote:
> It is possible to specify a regulator that should be turned on when
> dw_mmc is probed. At the moment dw_mmc will fail to use the regulator
> properly if the regulator probes after dw_mmc. Fix this problem by
> honoring EPROBE_DEFER.
>
> At the same time move the regulator code out of the slot init code.
> We only specify one regulator for the whole device
A question just out of curiousity: Is it really correct to have one vmmc
regulator for the whole device, instead of one regulator per slot?
This might be something obvious, but I don't know any details about
dw_mmc, so sorry if it's the case.
Best regards,
Tomasz
> and other parts of
> the code (like suspend/resume) assume that the regulator has only been
> enabled once.
>
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
> Changes in v2:
> - Avoid hackery to detect regulators that will never show up.
> - Move regulator out of slot init--it doesn't belong there.
>
> .../devicetree/bindings/mmc/synopsis-dw-mshc.txt | 4 +++
> drivers/mmc/host/dw_mmc.c | 40
> ++++++++++++---------- 2 files changed, 25 insertions(+), 19
> deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
> b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt index
> 726fd21..d5cc94e 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
> @@ -55,6 +55,9 @@ Optional properties:
>
> * broken-cd: as documented in mmc core bindings.
>
> +* vmmc-supply: The phandle to the regulator to use for vmmc. If this
> is + specified we'll defer probe until we can find this regulator. +
> Aliases:
>
> - All the MSHC controller nodes should be represented in the aliases
> node using @@ -79,6 +82,7 @@ board specific portions as listed below.
> broken-cd;
> fifo-depth = <0x80>;
> card-detect-delay = <200>;
> + vmmc-supply = <&buck8>;
>
> slot at 0 {
> reg = <0>;
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index bc3a1bc..ab5642d 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1895,7 +1895,7 @@ static int dw_mci_init_slot(struct dw_mci *host,
> unsigned int id) struct mmc_host *mmc;
> struct dw_mci_slot *slot;
> const struct dw_mci_drv_data *drv_data = host->drv_data;
> - int ctrl_id, ret;
> + int ctrl_id;
> u8 bus_width;
>
> mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
> @@ -1985,19 +1985,6 @@ static int dw_mci_init_slot(struct dw_mci *host,
> unsigned int id) #endif /* CONFIG_MMC_DW_IDMAC */
> }
>
> - host->vmmc = devm_regulator_get(mmc_dev(mmc), "vmmc");
> - if (IS_ERR(host->vmmc)) {
> - pr_info("%s: no vmmc regulator found\n",
mmc_hostname(mmc));
> - host->vmmc = NULL;
> - } else {
> - ret = regulator_enable(host->vmmc);
> - if (ret) {
> - dev_err(host->dev,
> - "failed to enable regulator: %d\n", ret);
> - goto err_setup_bus;
> - }
> - }
> -
> if (dw_mci_get_cd(mmc))
> set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
> else
> @@ -2023,10 +2010,6 @@ static int dw_mci_init_slot(struct dw_mci *host,
> unsigned int id) queue_work(host->card_workqueue, &host->card_work);
>
> return 0;
> -
> -err_setup_bus:
> - mmc_free_host(mmc);
> - return -EINVAL;
> }
>
> static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int
> id) @@ -2229,11 +2212,29 @@ int dw_mci_probe(struct dw_mci *host)
> }
> }
>
> + host->vmmc = devm_regulator_get(host->dev, "vmmc");
> + if (IS_ERR(host->vmmc)) {
> + ret = PTR_ERR(host->vmmc);
> + if (ret == -EPROBE_DEFER)
> + goto err_clk_ciu;
> +
> + dev_info(host->dev, "no vmmc regulator found: %d\n", ret);
> + host->vmmc = NULL;
> + } else {
> + ret = regulator_enable(host->vmmc);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(host->dev,
> + "regulator_enable fail: %d\n",
ret);
> + goto err_clk_ciu;
> + }
> + }
> +
> if (!host->bus_hz) {
> dev_err(host->dev,
> "Platform data must supply bus speed\n");
> ret = -ENODEV;
> - goto err_clk_ciu;
> + goto err_regulator;
> }
>
> host->quirks = host->pdata->quirks;
> @@ -2378,6 +2379,7 @@ err_dmaunmap:
> if (host->use_dma && host->dma_ops->exit)
> host->dma_ops->exit(host);
>
> +err_regulator:
> if (host->vmmc)
> regulator_disable(host->vmmc);
More information about the devicetree-discuss
mailing list