[PATCH v4 1/6] drivers: bus: add a new driver for WEIM

[Arnd Bergmann]

On Thursday 06 June 2013 23:09:37 Shawn Guo wrote:
> 
> On Tue, May 28, 2013 at 02:20:07PM +0800, Huang Shijie wrote:
> > The WEIM(Wireless External Interface Module) works like a bus.
> > You can attach many different devices on it, such as NOR, onenand.
> > 
> > In the case of i.MX6q-sabreauto, the NOR is connected to WEIM.
> > 
> > This patch also adds the devicetree binding document.
> > The driver only works when the devicetree is enabled.
> > 
> > Signed-off-by: Huang Shijie <b32955 at freescale.com>
> > ---
> >  Documentation/devicetree/bindings/bus/imx-weim.txt |   49 +++++++
> >  drivers/bus/Kconfig                                |    9 ++
> >  drivers/bus/Makefile                               |    1 +
> >  drivers/bus/imx-weim.c                             |  138 ++++++++++++++++++++
> >  4 files changed, 197 insertions(+), 0 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
> >  create mode 100644 drivers/bus/imx-weim.c
> 
> Since no one is collecting drivers/bus/ patches right now, I just
> applied the whole series to have the patch go via imx -> arm-soc.
> Please let me know if there is any problem.

Sounds ok to me. If we see a lot of these, we can try to find a
maintainer.

	Arnd