[PATCH] ARM: ux500: register LP5521 LEDs in the device tree

[Bryan Wu]

On Tue, Jun 4, 2013 at 12:35 AM, Lee Jones <lee.jones at linaro.org> wrote:
> On Mon, 03 Jun 2013, Bryan Wu wrote:
>
>> On Mon, Jun 3, 2013 at 1:18 AM, Lee Jones <lee.jones at linaro.org> wrote:
>> > On Fri, 31 May 2013, Bryan Wu wrote:
>> >
>> >> On Wed, May 22, 2013 at 1:12 AM, Linus Walleij
>> >> <linus.walleij at stericsson.com> wrote:
>> >> > From: Linus Walleij <linus.walleij at linaro.org>
>> >> >
>> >> > Based on pending device tree support in the LP55xx drivers
>> >> > we can add the correct LED and channel configuration from the
>> >> > ux500 device tree for all HREF variants.
>> >> >
>> >> > Cc: Milo Kim <Milo.Kim at ti.com>
>> >> > Cc: Bryan Wu <cooloney at gmail.com>
>> >> > Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
>> >> > ---
>> >> >  arch/arm/boot/dts/href.dtsi | 38 ++++++++++++++++++++++++++++++++------
>> >> >  1 file changed, 32 insertions(+), 6 deletions(-)
>> >> >
>> >> > diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
>> >> > index 62523f6..e315429 100644
>> >> > --- a/arch/arm/boot/dts/href.dtsi
>> >> > +++ b/arch/arm/boot/dts/href.dtsi
>> >> > @@ -63,16 +63,42 @@
>> >> >                 };
>> >> >
>> >> >                 i2c at 80128000 {
>> >> > -                       lp5521 at 0x33 {
>> >> > -                               compatible = "lp5521";
>> >> > +                       lp5521 at 33 {
>> >>
>> >> Is this right, I guess it should be still "lp5521 at 0x33", although it's
>> >> just a name.
>> >
>> > What makes you say that Bryan?
>> >
>> > All other nodes drop the '0x', as it's implied.
>> >
>>
>> But I still got this in this patch
>> "  bh1780 at 0x29 {"
>>
>> which is not changed. So which one should be the right?
>
> The one without the '0x' is correct.
>
> If there are any of these left over that Linus hasn't fixed yet, I'm
> happy to fix.

Sure, no problem. I just found this inconsistence confused me.

Thanks,
-Bryan