[PATCH RFC 0/3] first pass converting omap4 clock data to DT
Mike Turquette
mturquette at linaro.org
Tue Jun 4 16:39:15 EST 2013
This is a very incomplete conversion of a handful of OMAP4 PRCM clocks
from the statically defined clock data in
arch/arm/mach-omap2/cclock44xx_data.c to a new dts file in
arch/arm/boot/dts/omap4-clocks.dtsi.
I am not a DT expert so many of the choices here may be quite disgusting
to look at, or may be on the right path. In particular I simply include
the new omap4-clocks.dtsi from omap4.dtsi, which feels a bit kludgey.
Also this series depends on the basic clock bindings RFC I posted
earlier today[1].
I actually have an omap4-clock.dtsi file with many more clocks converted
to the mux-clock, divider-clock, fixed-clock, fixed-factor and
(unpublished) gate-clock bindings in my local repo, but it is not
currently booting. I wanted to get this early preview out regardless.
[1] http://article.gmane.org/gmane.linux.kernel/1501216
Mike Turquette (3):
clk: omap: introduce clock driver
ARM: dts: omap4 clock data
ARM: omap4: register DT clocks & remove old data
arch/arm/boot/dts/omap4-clocks.dtsi | 128 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 2 +
arch/arm/mach-omap2/cclock44xx_data.c | 54 ++------------
drivers/clk/Makefile | 1 +
drivers/clk/omap/Makefile | 1 +
drivers/clk/omap/clk.c | 55 +++++++++++++++
include/linux/clk/omap.h | 24 +++++++
7 files changed, 217 insertions(+), 48 deletions(-)
create mode 100644 arch/arm/boot/dts/omap4-clocks.dtsi
create mode 100644 drivers/clk/omap/Makefile
create mode 100644 drivers/clk/omap/clk.c
create mode 100644 include/linux/clk/omap.h
--
1.8.1.2
More information about the devicetree-discuss
mailing list