[PATCH] ARM: ux500: register LP5521 LEDs in the device tree

[Lee Jones]

On Fri, 31 May 2013, Bryan Wu wrote:

> On Wed, May 22, 2013 at 1:12 AM, Linus Walleij
> <linus.walleij at stericsson.com> wrote:
> > From: Linus Walleij <linus.walleij at linaro.org>
> >
> > Based on pending device tree support in the LP55xx drivers
> > we can add the correct LED and channel configuration from the
> > ux500 device tree for all HREF variants.
> >
> > Cc: Milo Kim <Milo.Kim at ti.com>
> > Cc: Bryan Wu <cooloney at gmail.com>
> > Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> > ---
> >  arch/arm/boot/dts/href.dtsi | 38 ++++++++++++++++++++++++++++++++------
> >  1 file changed, 32 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
> > index 62523f6..e315429 100644
> > --- a/arch/arm/boot/dts/href.dtsi
> > +++ b/arch/arm/boot/dts/href.dtsi
> > @@ -63,16 +63,42 @@
> >                 };
> >
> >                 i2c at 80128000 {
> > -                       lp5521 at 0x33 {
> > -                               compatible = "lp5521";
> > +                       lp5521 at 33 {
> 
> Is this right, I guess it should be still "lp5521 at 0x33", although it's
> just a name.

What makes you say that Bryan?

All other nodes drop the '0x', as it's implied.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog