[PATCH v4 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller
Vivek Gautam
gautam.vivek at samsung.com
Mon Jan 28 21:26:22 EST 2013
Adding PHY driver support for USB 3.0 controller for Samsung's
SoCs.
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
Changes from v3:
- Making SAMSUNG_USB3PHY dependent on SAMSUNG_USBPHY.
- Adding USB_DWC3 to dependencies of SAMSUNG_USB2PHY since
dwc3 controller also looks for USB2 type PHY.
drivers/usb/phy/Kconfig | 11 +-
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/samsung-usb3.c | 349 ++++++++++++++++++++++++++++++++++++++
drivers/usb/phy/samsung-usbphy.h | 81 +++++++++
4 files changed, 441 insertions(+), 1 deletions(-)
create mode 100644 drivers/usb/phy/samsung-usb3.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index cc0d230..9325a95 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -52,14 +52,23 @@ config SAMSUNG_USBPHY
help
Enable this to support Samsung USB phy controllers for Samsung
SoCs.
+ Further enable USB 2.0 type PHY or USB 3.0 type PHY as required
+ for USB controllers in use.
if SAMSUNG_USBPHY
config SAMSUNG_USB2PHY
bool "Samsung USB 2.0 PHY controller Driver"
- depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
+ depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS || USB_DWC3
help
Enable this to support Samsung USB 2.0 (High Speed) phy controller
for Samsung SoCs.
+config SAMSUNG_USB3PHY
+ bool "Samsung USB 3.0 PHY controller Driver"
+ depends on USB_DWC3
+ help
+ Enable this to support Samsung USB 3.0 (Super Speed) phy controller
+ for samsung SoCs.
+
endif
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 7ba9862..b8505ac 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
obj-$(CONFIG_SAMSUNG_USB2PHY) += samsung-usb2.o
+obj-$(CONFIG_SAMSUNG_USB3PHY) += samsung-usb3.o
diff --git a/drivers/usb/phy/samsung-usb3.c b/drivers/usb/phy/samsung-usb3.c
new file mode 100644
index 0000000..29e1321
--- /dev/null
+++ b/drivers/usb/phy/samsung-usb3.c
@@ -0,0 +1,349 @@
+/* linux/drivers/usb/phy/samsung-usb3.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Vivek Gautam <gautam.vivek at samsung.com>
+ *
+ * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "samsung-usbphy.h"
+
+/*
+ * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
+ */
+static u32 samsung_usb3_phy_set_refclk(struct samsung_usbphy *sphy)
+{
+ u32 reg;
+ u32 refclk;
+
+ refclk = sphy->ref_clk_freq;
+
+ reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+ PHYCLKRST_FSEL(refclk);
+
+ switch (refclk) {
+ case FSEL_CLKSEL_50M:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x00));
+ break;
+ case FSEL_CLKSEL_20M:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x00));
+ break;
+ case FSEL_CLKSEL_19200K:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x88));
+ break;
+ case FSEL_CLKSEL_24M:
+ default:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x88));
+ break;
+ }
+
+ return reg;
+}
+
+static int samsung_exynos5_usb3_phy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyparam0;
+ u32 phyparam1;
+ u32 linksystem;
+ u32 phybatchg;
+ u32 phytest;
+ u32 phyclkrst;
+
+ /* Reset USB 3.0 PHY */
+ writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
+
+ phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
+ /* Select PHY CLK source */
+ phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
+ /* Set Loss-of-Signal Detector sensitivity */
+ phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
+ phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
+ writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
+
+ writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
+
+ /*
+ * Setting the Frame length Adj value[6:1] to default 0x20
+ * See xHCI 1.0 spec, 5.2.4
+ */
+ linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
+ LINKSYSTEM_FLADJ(0x20);
+ writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
+
+ phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
+ /* Set Tx De-Emphasis level */
+ phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
+ phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
+ writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
+
+ phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
+ phybatchg |= PHYBATCHG_UTMI_CLKSEL;
+ writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
+
+ /* PHYTEST POWERDOWN Control */
+ phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+ phytest &= ~(PHYTEST_POWERDOWN_SSP |
+ PHYTEST_POWERDOWN_HSP);
+ writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+
+ /* UTMI Power Control */
+ writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
+
+ phyclkrst = samsung_usb3_phy_set_refclk(sphy);
+
+ phyclkrst |= PHYCLKRST_PORTRESET |
+ /* Digital power supply in normal operating mode */
+ PHYCLKRST_RETENABLEN |
+ /* Enable ref clock for SS function */
+ PHYCLKRST_REF_SSP_EN |
+ /* Enable spread spectrum */
+ PHYCLKRST_SSC_EN |
+ /* Power down HS Bias and PLL blocks in suspend mode */
+ PHYCLKRST_COMMONONN;
+
+ writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+ udelay(10);
+
+ phyclkrst &= ~(PHYCLKRST_PORTRESET);
+ writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+ return 0;
+}
+
+static void samsung_exynos5_usb3_phy_disable(struct samsung_usbphy *sphy)
+{
+ u32 phyutmi;
+ u32 phyclkrst;
+ u32 phytest;
+ void __iomem *regs = sphy->regs;
+
+ phyutmi = PHYUTMI_OTGDISABLE |
+ PHYUTMI_FORCESUSPEND |
+ PHYUTMI_FORCESLEEP;
+ writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
+
+ /* Resetting the PHYCLKRST enable bits to reduce leakage current */
+ phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
+ phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
+ PHYCLKRST_SSC_EN |
+ PHYCLKRST_COMMONONN);
+ writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+ /* Control PHYTEST to remove leakage current */
+ phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+ phytest |= (PHYTEST_POWERDOWN_SSP |
+ PHYTEST_POWERDOWN_HSP);
+ writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+}
+
+static int samsung_usb3_phy_init(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+ unsigned long flags;
+ int ret = 0;
+
+ sphy = phy_to_sphy(phy);
+
+ /* Enable the phy clock */
+ ret = clk_prepare_enable(sphy->clk);
+ if (ret) {
+ dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+ return ret;
+ }
+
+ spin_lock_irqsave(&sphy->lock, flags);
+
+ /* setting default phy-type for USB 3.0 */
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+ /* Disable phy isolation */
+ samsung_usbphy_set_isolation(sphy, false);
+
+ /* Initialize usb phy registers */
+ samsung_exynos5_usb3_phy_enable(sphy);
+
+ spin_unlock_irqrestore(&sphy->lock, flags);
+
+ /* Disable the phy clock */
+ clk_disable_unprepare(sphy->clk);
+
+ return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usb3_phy_shutdown(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+ unsigned long flags;
+
+ sphy = phy_to_sphy(phy);
+
+ if (clk_prepare_enable(sphy->clk)) {
+ dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+ return;
+ }
+
+ spin_lock_irqsave(&sphy->lock, flags);
+
+ /* setting default phy-type for USB 3.0 */
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+ /* De-initialize usb phy registers */
+ samsung_exynos5_usb3_phy_disable(sphy);
+
+ /* Enable phy isolation */
+ samsung_usbphy_set_isolation(sphy, true);
+
+ spin_unlock_irqrestore(&sphy->lock, flags);
+
+ clk_disable_unprepare(sphy->clk);
+}
+
+static int samsung_usb3_phy_probe(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy;
+ struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct resource *phy_mem;
+ void __iomem *phy_base;
+ struct clk *clk;
+ int ret;
+
+ phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!phy_mem) {
+ dev_err(dev, "%s: missing mem resource\n", __func__);
+ return -ENODEV;
+ }
+
+ phy_base = devm_request_and_ioremap(dev, phy_mem);
+ if (!phy_base) {
+ dev_err(dev, "%s: register mapping failed\n", __func__);
+ return -ENXIO;
+ }
+
+ sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+ if (!sphy)
+ return -ENOMEM;
+
+ clk = devm_clk_get(dev, "usbdrd30");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Failed to get device clock\n");
+ return PTR_ERR(clk);
+ }
+
+ sphy->dev = dev;
+
+ if (dev->of_node) {
+ ret = samsung_usbphy_parse_dt(sphy);
+ if (ret < 0)
+ return ret;
+ } else {
+ if (!pdata) {
+ dev_err(dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+ }
+
+ sphy->plat = pdata;
+ sphy->regs = phy_base;
+ sphy->clk = clk;
+ sphy->phy.dev = sphy->dev;
+ sphy->phy.label = "samsung-usb3-phy";
+ sphy->phy.init = samsung_usb3_phy_init;
+ sphy->phy.shutdown = samsung_usb3_phy_shutdown;
+ sphy->drv_data = samsung_usbphy_get_driver_data(pdev);
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ spin_lock_init(&sphy->lock);
+
+ platform_set_drvdata(pdev, sphy);
+
+ return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3);
+}
+
+static int samsung_usb3_phy_remove(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&sphy->phy);
+
+ if (sphy->pmuregs)
+ iounmap(sphy->pmuregs);
+ if (sphy->sysreg)
+ iounmap(sphy->sysreg);
+
+ return 0;
+}
+
+static struct samsung_usbphy_drvdata usb3_phy_exynos5 = {
+ .cpu_type = TYPE_EXYNOS5250,
+ .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+ {
+ .compatible = "samsung,exynos5250-usb3-phy",
+ .data = &usb3_phy_exynos5
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+ {
+ .name = "exynos5250-usb3-phy",
+ .driver_data = (unsigned long)&usb3_phy_exynos5,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usb3_phy_driver = {
+ .probe = samsung_usb3_phy_probe,
+ .remove = samsung_usb3_phy_remove,
+ .id_table = samsung_usbphy_driver_ids,
+ .driver = {
+ .name = "samsung-usb3-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+ },
+};
+
+module_platform_driver(samsung_usb3_phy_driver);
+
+MODULE_DESCRIPTION("Samsung USB 3.0 phy controller");
+MODULE_AUTHOR("Vivek Gautam <gautam.vivek at samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usb3-phy");
diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
index 969632b..f7e657d 100644
--- a/drivers/usb/phy/samsung-usbphy.h
+++ b/drivers/usb/phy/samsung-usbphy.h
@@ -145,6 +145,87 @@
#define EXYNOS5_PHY_OTG_TUNE (0x40)
+/* EXYNOS5: USB 3.0 DRD */
+#define EXYNOS5_DRD_LINKSYSTEM (0x04)
+
+#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
+
+#define EXYNOS5_DRD_PHYUTMI (0x08)
+
+#define PHYUTMI_OTGDISABLE (0x1 << 6)
+#define PHYUTMI_FORCESUSPEND (0x1 << 1)
+#define PHYUTMI_FORCESLEEP (0x1 << 0)
+
+#define EXYNOS5_DRD_PHYPIPE (0x0c)
+
+#define EXYNOS5_DRD_PHYCLKRST (0x10)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
+
+#define PHYCLKRST_SSC_EN (0x1 << 20)
+#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
+#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
+
+#define PHYCLKRST_FSEL_MASK (0x3f << 5)
+#define PHYCLKRST_FSEL(_x) ((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN (0x1 << 4)
+
+#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
+
+#define PHYCLKRST_PORTRESET (0x1 << 1)
+#define PHYCLKRST_COMMONONN (0x1 << 0)
+
+#define EXYNOS5_DRD_PHYREG0 (0x14)
+#define EXYNOS5_DRD_PHYREG1 (0x18)
+
+#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
+
+#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
+
+#define EXYNOS5_DRD_PHYPARAM1 (0x20)
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
+
+#define EXYNOS5_DRD_PHYTERM (0x24)
+
+#define EXYNOS5_DRD_PHYTEST (0x28)
+
+#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
+#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
+
+#define EXYNOS5_DRD_PHYADP (0x2c)
+
+#define EXYNOS5_DRD_PHYBATCHG (0x30)
+
+#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
+
+#define EXYNOS5_DRD_PHYRESUME (0x34)
+#define EXYNOS5_DRD_LINKPORT (0x44)
+
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
--
1.7.6.5
More information about the devicetree-discuss
mailing list