[PATCH] arm: dts: Add uart1 and uart2 to igep boards.

[Javier Martinez Canillas]

On Sat, Jan 26, 2013 at 4:16 PM, Matthias Brugger
<matthias.bgg at gmail.com<javascript:;>>
wrote:
> Hi Benoit,
>
> 2012/12/12 Benoit Cousson <b-cousson at ti.com <javascript:;>>:
>> Hi Matthias,
>>
>> On 12/12/2012 04:33 PM, Matthias Brugger wrote:
>>> This patch is a follow-up patch for Javier Martinez effort adding
initial
>>> device tree support to IGEP technology devices. [1]
>>>
>>> It adds uart1 and uart2 bindings to the generic dtsi for the IGEP
boards.
>>>
>>> [1] http://www.spinics.net/lists/linux-omap/msg83409.html
>>>
>>> Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com <javascript:;>>
>>> ---
>>>  arch/arm/boot/dts/omap3-igep.dtsi |   24 ++++++++++++++++++++++++
>>>  1 file changed, 24 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi
b/arch/arm/boot/dts/omap3-igep.dtsi
>>> index 125fe00..c02e3c0 100644
>>> --- a/arch/arm/boot/dts/omap3-igep.dtsi
>>> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
>>> @@ -27,6 +27,20 @@
>>>  };
>>>
>>>  &omap3_pmx_core {
>>> +     uart1_pins: pinmux_uart1_pins {
>>> +             pinctrl-single,pins = <
>>> +                     0x152 0x100     /* uart1_rx.uart1_rx INPUT |
MODE0 */
>>> +                     0x14c 0         /* uart1_tx.uart1_tx OUTPUT |
MODE0 */
>>> +             >;
>>> +     };
>>> +
>>> +     uart2_pins: pinmux_uart2_pins {
>>> +             pinctrl-single,pins = <
>>> +                     0x14a 0x100     /* uart2_rx.uart2_rx INPUT |
MODE0 */
>>> +                     0x148 0         /* uart2_tx.uart2_tx OUTPUT |
MODE0 */
>>> +             >;
>>> +     };
>>> +
>>>       uart3_pins: pinmux_uart3_pins {
>>>               pinctrl-single,pins = <
>>>                       0x16e 0x100     /* uart3_rx.uart3_rx INPUT |
MODE0 */
>>> @@ -77,6 +91,16 @@
>>>       status = "disabled";
>>>  };
>>>
>>> +&uart1 {
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&uart1_pins>;
>>> +};
>>> +
>>> +&uart2 {
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&uart2_pins>;
>>> +};
>>> +
>>>  &uart3 {
>>>         pinctrl-names = "default";
>>>         pinctrl-0 = <&uart3_pins>;
>>>
>>
>> That looks good to me. I'll apply it on top of javier's series for 3.9.
>
> Can you pin-point me to the repository where this patches are in right
> now? I tried to figure it out these days, but didn't found where to
> clone the repository from.
>
> Thanks,
> Matthias
>

Hi Matthias,

OMAP DT tree is: git://
git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git

Hope it helps,
Javier
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130126/50b9097a/attachment.html>